Join 60,000+ competitive exam aspirants
The compressor has to be started
Before starting of gas turbine
After starting of gas turbine
Simultaneously with starting of gas turbine
At any time (i.e. before or after starting of gas turbine)
Before starting of gas turbine
In a gas turbine power plant, the compressor must be started first to establish the necessary airflow and pressure ratio within the system before fuel is injected. Starting the compressor ahead of the turbine ensures that there is sufficient air mass flow to support the combustion process upon ignition, preventing overheating or flame instability.
In a gas turbine power plant, the compressor must be started first to establish the necessary airflow and pressure ratio within the system before fuel is injected. Starting the compressor ahead of the turbine ensures that there is sufficient air mass flow to support the combustion process upon ignition, preventing overheating or flame instability.
WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ тАФ The net work output of the Brayton cycle
T1тАЛT2тАЛтАЛ=(P1тАЛP2тАЛтАЛ)╬│╬│тИТ1тАЛ тАФ Isentropic temperature-pressure relation for the compressor
Gas turbines operate on the Brayton cycle, which requires an initial compression of atmospheric air. A starting motor (or auxiliary prime mover) is used to bring the compressor up to a self-sustaining speed. Once the required air flow and pressure are achieved, the ignition system is triggered and fuel is introduced into the combustion chamber to initiate the power cycle.
The compressor is not self-starting at zero speed.
The startup motor is disconnected once the turbine reaches self-sustaining speed.
Air must be purged from the system before fuel admission to prevent explosions.
Compression ratio determines the thermal efficiency of the cycle.
Prevents internal component damage from heat spikes
Ensures stable combustion process
Maintains air-fuel ratio within flammability limits
Requires significant auxiliary power for startup
Increases mechanical complexity of the shaft system
Combined Cycle Power Plants (CCPP)
Jet Engines and Aviation Turbines
Peaking Power Plants
A purge cycle is often conducted by the compressor before ignition to clear any residual fuel vapors.
Option B is incorrect because starting the turbine without an existing airflow would result in rapid overheating and potential catastrophic damage to the turbine blades.
Option C is physically impossible as the shaft must be rotated by a starter before ignition can occur.
A is correct тАФ The compressor must be brought to a specific ignition speed before fuel injection to establish the necessary flow and pressure within the combustion chamber.
In engineering exams, always remember that 'sequence of operation' questions prioritize safety and thermal management; compressors essentially act as a prerequisite to heat-generating components.