Join 60,000+ competitive exam aspirants
In order to have a lower cost of electrical energy generation
Load factor and diversity factor should be low
Load factor should be low but diversity factor should be high
Load factor should be high but the diversity factor should be low
Load factor and diversity factor should be high
Load factor and diversity factor should be high
To minimize the cost of electrical energy generation, the utility must maximize the utilization of installed capacity, which is achieved by maintaining a high load factor and a high diversity factor. A high load factor implies the plant is generating energy closer to its maximum demand for a longer duration, reducing fixed costs per unit of energy.
To minimize the cost of electrical energy generation, the utility must maximize the utilization of installed capacity, which is achieved by maintaining a high load factor and a high diversity factor. A high load factor implies the plant is generating energy closer to its maximum demand for a longer duration, reducing fixed costs per unit of energy.
Load┬аFactor=Maximum┬аDemandAverage┬аDemandтАЛ
Diversity┬аFactor=Simultaneous┬аMax┬аDemandтИСIndividual┬аMax┬аDemandsтАЛ
CostperunitтИЭLoadFactor├ЧDiversityFactor1тАЛ
The cost of energy is inversely proportional to the plant's utilization. The load factor is the ratio of average demand to maximum demand; a high value indicates efficient usage of assets. The diversity factor is the ratio of the sum of individual maximum demands to the simultaneous maximum demand; a high diversity factor implies that individual peak loads do not occur at the same time, thereby reducing the required installed capacity for a given total load.
High load factor spreads the fixed costs over a larger number of units generated.
Diversity factor measures the non-coincidence of loads; higher diversity reduces the burden on the peak capacity of the system.
The combination of both factors ensures the minimum required capacity for the maximum number of consumers.
Reducing installed capacity directly lowers the capital expenditure (CAPEX) for the power plant.
Reduced capital investment per kilowatt
Lower overall tariff for consumers
Better equipment utilization
Complexity in managing demand-side responses
Requires advanced metering infrastructure for peak load management
Grid management and power system planning
Utility tariff design and financial forecasting
The diversity factor is always greater than or equal to 1.
Option C is incorrect because a low diversity factor indicates that individual peak demands coincide, necessitating a larger, more expensive plant for the same total load.
D is correct тАФ Both load factor and diversity factor should be high to ensure the installed capacity is utilized to its maximum potential, thereby lowering the cost per unit of electricity generated.
Always remember: 'Diversity' refers to the timing of peaks; if everyone turns on their AC at 2 PM, diversity factor is low and system cost is high!