Join 60,000+ competitive exam aspirants
In paper insulated cables,┬а the conductor cross section is usually limited to
50 mm┬▓
250 mm┬▓
600 mm┬▓
1200 mm┬▓
600 mm┬▓
In impregnated paper-insulated cables, the conductor cross-section is limited to 600 mm┬▓ primarily due to the physical limitations of manufacturing processes and the cable's mechanical flexibility. Exceeding this size results in a cable that is too stiff for practical installation and creates difficulties in maintaining uniform insulation wrapping.
In impregnated paper-insulated cables, the conductor cross-section is limited to 600 mm┬▓ primarily due to the physical limitations of manufacturing processes and the cable's mechanical flexibility. Exceeding this size results in a cable that is too stiff for practical installation and creates difficulties in maintaining uniform insulation wrapping.
R=╧БAlтАЛ тАФ Conductor resistance formula demonstrating that while increasing A reduces resistance, it increases physical dimensions.
ThтАЛ=╬▒╬Ф╬╕L тАФ Thermal expansion stress factor influencing mechanical limits of large cables.
The manufacturing of paper-insulated cables requires the application of multiple layers of impregnated paper tapes around the conductor. As the cross-sectional area increases beyond 600 mm┬▓, the physical bulk of the cable makes it extremely difficult to wind the paper tapes under constant tension. Furthermore, thermal expansion cycles in such large cables can cause mechanical stress on the paper layers, leading to potential dielectric failure or 'void' formation.
Paper insulation relies on consistent tension during taping.
Very large conductors suffer from high internal thermal stresses.
Bending radius becomes prohibitive for cables exceeding 600 mm┬▓.
Modern cross-linked polyethylene (XLPE) cables are increasingly replacing paper-insulated cables for high-capacity applications.
Excellent dielectric strength
High long-term reliability in stable environments
Hygroscopic nature of paper (moisture sensitivity)
Complex manufacturing process
High Voltage (HV) transmission
Submarine power cables
600 mm┬▓ is a standard engineering limit defined by the British and Indian Standards for PILC (Paper Insulated Lead Covered) cables.
Options like 1200 mm┬▓ exceed the practical limit for consistent impregnation quality, leading to insulation voids.
C is correct тАФ Paper insulated cables are typically limited to a cross-sectional area of 600 mm┬▓ due to limitations in mechanical flexibility and the manufacturing process of winding impregnated paper.
Always remember that while increasing conductor area reduces I2R losses, the practical engineering constraint is defined by the installation and manufacturing limits of the insulating material.