Join 60,000+ competitive exam aspirants
The maximum safe temperature of paper insulated cable is about
60 ┬░C
95 ┬░C
135 ┬░C
165 ┬░C
95 ┬░C
Paper insulated lead-covered (PILC) cables have a maximum safe operating temperature of 95 ┬░C for lower voltage ranges, primarily determined by the thermal degradation limits of the cellulose-based paper insulation. Exceeding this temperature leads to rapid thermal aging, chemical decomposition, and eventual dielectric breakdown of the insulation.
Paper insulated lead-covered (PILC) cables have a maximum safe operating temperature of 95 ┬░C for lower voltage ranges, primarily determined by the thermal degradation limits of the cellulose-based paper insulation. Exceeding this temperature leads to rapid thermal aging, chemical decomposition, and eventual dielectric breakdown of the insulation.
TmaxтАЛ=95┬░C тАФ Maximum continuous operating temperature for PILC cables
IratedтАЛтИЭRthтАЛтЛЕRacтАЛTmaxтАЛтИТTambтАЛтАЛтАЛ тАФ Current carrying capacity relationship with thermal limit
The insulation is composed of wood pulp paper impregnated with insulating mineral oil. As temperature increases, the chemical bonds in the cellulose fibers break down, reducing mechanical strength and increasing porosity, which attracts moisture. Furthermore, the viscosity of the impregnating oil decreases significantly at high temperatures, leading to migration or drainage of the oil, which creates voids (hot spots) that facilitate partial discharge and electrical failure.
Paper insulation is hygroscopic and loses insulating properties if temperature cycles cause voids due to oil migration.
The 95 ┬░C rating applies to standard belted or screened PILC cables at rated voltage.
Higher temperatures cause irreversible degradation of paper mechanical integrity.
Thermal resistivity of the cable construction dictates the actual current load that keeps the conductor at 95 ┬░C.
High dielectric strength when properly impregnated
Proven long-term reliability in underground systems
Excellent resistance to high-voltage stress
Highly hygroscopic (requires lead/aluminum sheath)
Susceptible to oil migration on slopes
Heavy and inflexible compared to XLPE
Medium and High Voltage distribution networks
Underground utility power transmission
The rating is based on the limit of cellulose thermal degradation.
For comparison, XLPE cables generally allow for a higher continuous operating temperature of 90 ┬░C to 105 ┬░C depending on the standard and insulation grade.
B is correct тАФ The maximum safe continuous operating temperature for a paper-insulated cable is 95 ┬░C.
Always distinguish between the operating temperature of PILC (95 ┬░C) and PVC insulated cables (typically 70 ┬░C), as this is a common trap in power system exams.