Join 60,000+ competitive exam aspirants
In pumped storage power plants
Water is recirculated through water turbines
Reversible turbines are used which operate as turbine for power generation during peak load hours and as pump for pumping water during peak-off hours
Plain Francis turbines are used
Both (a) and (c)
Reversible turbines are used which operate as turbine for power generation during peak load hours and as pump for pumping water during peak-off hours
A pumped storage power plant acts as a large-scale energy storage system by utilizing two water reservoirs at different elevations. During periods of low electricity demand, it pumps water from the lower reservoir to the upper one using the grid's excess energy; during peak demand, it releases this water to generate power.
A pumped storage power plant acts as a large-scale energy storage system by utilizing two water reservoirs at different elevations. During periods of low electricity demand, it pumps water from the lower reservoir to the upper one using the grid's excess energy; during peak demand, it releases this water to generate power.
EpotentialтАЛ=mgh тАФ Potential energy stored in the upper reservoir, where m is mass, g is gravity, and h is head
╬╖roundtripтАЛ=EpumpтАЛEgenтАЛтАЛ тАФ Round-trip efficiency representing the ratio of energy generated to energy consumed
The plant utilizes a reversible pump-turbine unit coupled to a motor-generator. In pumping mode (off-peak), the unit acts as a motor driven by grid power to lift water. In generating mode (peak load), the potential energy of the stored water is converted into mechanical energy, driving the unit as a turbine to produce electricity.
Pumped storage plants provide grid stability by balancing intermittent renewable energy sources.
They are the most mature technology for large-scale electrical energy storage.
The reversible pump-turbine design significantly reduces the cost and space required for dual-function operations.
High round-trip efficiency (typically 70-85%)
Provides essential ancillary services like frequency regulation and black-start capability
High initial capital investment for construction of reservoirs
Geographically constrained by the requirement for two reservoirs at different altitudes
Peak load shaving
Grid frequency regulation
Energy storage for variable renewables like wind and solar
Option A is incorrect because recirculation is not the purpose; it's a transfer of potential energy.
Option C is incorrect because Francis turbines are specialized; a 'plain' Francis turbine cannot operate as a pump effectively without reversible modifications.
B is correct тАФ Reversible turbines function as dual-purpose machines to facilitate energy storage via pumping and power generation via turbining.
Always remember that pumped storage plants are classified as 'Storage' rather than 'Primary' sources, as they consume more energy than they produce due to system losses.