Join 60,000+ competitive exam aspirants
The maximum head of a Kaplan turbine is limited to
25 m
70 m
125 m
100 m
25 m
The Kaplan turbine is an axial flow reaction turbine specifically designed for low-head and high-flow rate applications. Due to its axial flow design and the structural limitations of the adjustable runner blades under high pressure, it is generally restricted to a maximum head of 25 meters.
The Kaplan turbine is an axial flow reaction turbine specifically designed for low-head and high-flow rate applications. Due to its axial flow design and the structural limitations of the adjustable runner blades under high pressure, it is generally restricted to a maximum head of 25 meters.
Q=AтЛЕv тАФ Continuity equation relating flow rate, area, and velocity
P=╬╖тЛЕ╧БтЛЕgтЛЕQтЛЕH тАФ Power output equation where H is head
The Kaplan turbine operates on the principle of axial flow, where water flows parallel to the shaft of the turbine. It features adjustable blades similar to an aircraft propeller, which allow the turbine to maintain high efficiency across a wide range of flow rates. As the head increases beyond 25-30 meters, the velocity of water creates cavitation issues and excessive mechanical stress on the blade adjustment mechanism, limiting its use to low-head, high-discharge power sites.
Kaplan turbines are categorized as propeller-type turbines with adjustable blades.
Optimal for sites with large flow quantities and low head variations.
The runner blades can be adjusted during operation to maintain efficiency at part-load.
Higher head leads to increased cavitation and mechanical design challenges.
High efficiency at low head
Compact size compared to Francis turbines of similar capacity
Excellent part-load efficiency
Complex blade adjustment mechanism
Susceptible to cavitation at high heads
Not suitable for high-head installations
Run-of-river hydro power plants
Low-head tidal energy projects
Large-scale river barrage plants
| Feature | Kaplan | Francis |
|---|---|---|
Max Head Limit | Up to 25 m | Up to 300+ m |
For heads ranging from 30m to 300m, Francis turbines are typically preferred.
For heads above 300m, Pelton wheels are the standard choice due to their impulse action.
A is correct тАФ The Kaplan turbine is specifically engineered for low-head applications, typically limited to a head of 25 meters to ensure operational efficiency and avoid cavitation.
Always remember the classification by head: Pelton (High), Francis (Medium), Kaplan (Low). This is a foundational hierarchy in hydro power engineering.