Join 60,000+ competitive exam aspirants
In the context of vehicular characteristics and efficiency of brakes, braking distance is:
directly proportional to speed of vehicle
inversely proportional to design coefficient of friction
inversely proportional to speed of vehicle
directly proportional to design coefficient of friction
inversely proportional to design coefficient of friction
Braking distance is the distance a vehicle travels from the moment the brakes are applied until it comes to a complete halt. It is mathematically governed by the energy balance between the kinetic energy of the moving vehicle and the work done by the frictional forces during braking.
IRC:73-1980 (Geometric Design Standards for Rural Highways)
Braking distance is the distance a vehicle travels from the moment the brakes are applied until it comes to a complete halt. It is mathematically governed by the energy balance between the kinetic energy of the moving vehicle and the work done by the frictional forces during braking.
d=2тЛЕgтЛЕfv2тАЛ тАФ where d is braking distance, v is velocity, g is gravity, and f is the longitudinal coefficient of friction.
According to the principle of work-energy, the kinetic energy EkтАЛ=21тАЛmv2 must be dissipated by the frictional work W=FтЛЕd, where F is the braking force equal to ╬╝тЛЕmтЛЕg. By equating these, the braking distance d=2тЛЕ╬╝тЛЕgv2тАЛ. Thus, the distance d is directly proportional to the square of the velocity (v2) and inversely proportional to the coefficient of friction (╬╝).
Braking distance increases exponentially with speed.
Higher road surface friction (higher ╬╝) significantly reduces the required braking distance.
In wet or icy conditions, the coefficient of friction decreases, leading to longer braking distances.
Ensures safety by determining minimum sight distance requirements.
Helps in designing proper road geometry and curve radii.
Does not account for human reaction time (which defines Stopping Sight Distance).
Assumes constant deceleration, which is an idealization.
Highway geometric design.
Traffic safety audits and accident reconstruction.
Option A is incorrect because braking distance is proportional to the square of the speed (v2).
Option C is incorrect because the relationship is inverse to friction, not speed.
Option D is incorrect as it implies higher friction leads to longer braking, which is physically false.
B is correct тАФ the braking distance is inversely proportional to the design coefficient of friction (╬╝) as defined by the relation d=2тЛЕgтЛЕ╬╝v2тАЛ.
Always remember that Stopping Sight Distance (SSD) = Lag Distance + Braking Distance. The lag distance is linear with speed, whereas braking distance is quadratic with speed.