Join 60,000+ competitive exam aspirants
Increase in temperature in overhead transmission line causes
Increase in stress and length
Decrease in stress and length
Decrease in stress but increases length
None of above
Decrease in stress but increases length
When the temperature of an overhead transmission line increases, the conductor undergoes thermal expansion, leading to an increase in its physical length. Since the distance between the towers is fixed, this increased length causes the sag to increase, which subsequently reduces the tension (stress) in the conductor.
When the temperature of an overhead transmission line increases, the conductor undergoes thermal expansion, leading to an increase in its physical length. Since the distance between the towers is fixed, this increased length causes the sag to increase, which subsequently reduces the tension (stress) in the conductor.
LtтАЛ=L0тАЛ(1+╬▒╬Фt) тАФ linear expansion of the conductor
S=8TwтЛЕL2тАЛ тАФ sag calculation where T is tension
The phenomenon is governed by the linear thermal expansion of metals. According to Hooke's Law and the catenary curve properties, as the conductor length L increases due to the temperature coefficient ╬▒, the sag S increases proportionally. Since tension T is inversely related to sag (TтИЭS1тАЛ), the mechanical stress on the conductor and supporting structures decreases as the temperature rises.
Increase in temperature causes thermal elongation of the conductor material.
Higher sag increases the ground clearance risk but reduces mechanical load on the tower.
Extreme temperatures may violate minimum clearance safety standards (e.g., Indian Electricity Rules).
Thermal stress is a critical factor in transmission line sag-tension analysis.
Reduces mechanical stress on the insulators and towers at high temperatures.
Allows for natural compensation of expansion without immediate structural damage.
Increased sag reduces ground clearance, which is a safety hazard.
Can lead to electrical discharge if clearance becomes too low.
Transmission line sag-tension calculations
Tower spot height determination
Clearance management in rural and urban utility planning
The linear expansion coefficient ╬▒ for ACSR conductors is approximately 19.3├Ч10тИТ6/┬░C.
Option A is incorrect because stress decreases, not increases, with higher temperature.
Option B is incorrect because length increases, not decreases, with higher temperature.
C is correct тАФ Increased temperature causes the conductor to expand (increasing length), which leads to more sag and a corresponding decrease in mechanical tension (stress).
In competitive exams, always remember that 'Sag' and 'Tension' are inversely proportional for a given span. High temperature тЖТ High Sag тЖТ Low Tension.