Join 60,000+ competitive exam aspirants
The sag of transmission line is least affected owing to
Weight of conductor
Current through the conductor
Atmospheric temperature
Ice deposition on conductor
Current through the conductor
The sag of an overhead transmission line is primarily a mechanical phenomenon governed by the tension in the conductor, the span length, and the weight per unit length of the conductor. While the current flow causes I┬▓с┤┐ losses and increases conductor temperature, the resulting thermal expansion is typically negligible compared to the significant physical effects of structural loading.
The sag of an overhead transmission line is primarily a mechanical phenomenon governed by the tension in the conductor, the span length, and the weight per unit length of the conductor. While the current flow causes I┬▓с┤┐ losses and increases conductor temperature, the resulting thermal expansion is typically negligible compared to the significant physical effects of structural loading.
S=8TwтЛЕl2тАЛ тАФ Sag of a transmission line
╬ФL=╬▒тЛЕLтЛЕ╬Ф╬╕ тАФ Thermal expansion effect
The sag (S) of a transmission line is calculated using the formula S = (w * l┬▓) / (8 * T), where 'w' is the weight of the conductor per unit length, 'l' is the span length, and 'T' is the tension. Atmospheric temperature affects sag via thermal expansion, and ice deposition increases the effective weight 'w'. Current passing through a conductor increases its temperature, but for standard transmission line designs, the mechanical forces of wind and ice are the dominant variables compared to ohmic heating.
Weight of the conductor (w) directly increases sag.
Tension (T) is inversely proportional to sag.
Atmospheric temperature changes lead to thermal expansion, affecting the conductor length.
Ice deposition significantly increases the effective weight (wtotalтАЛ = sqrt(w┬▓ + wiceтАЛ┬▓)).
Current heating effect is generally insignificant for mechanical sag calculations in standard utility practice.
Reduced sag improves ground clearance.
Optimal tension minimizes stress on insulators.
Excessive sag can lead to flashovers with trees or ground.
High tension can cause mechanical failure of the conductor.
Overhead line sag-tension charts
Power transmission route planning
Option A (Weight) is a primary factor directly in the numerator of the sag formula.
Option C (Temperature) is a secondary factor that alters the conductor length due to thermal coefficient of expansion.
Option D (Ice) adds significant weight, increasing the vertical load and thus the sag.
Option B (Current) only indirectly affects sag via temperature rise, which is minor compared to mechanical loading.
B is correct тАФ Current through the conductor has the least effect on sag compared to mechanical and environmental factors.
Always remember that in transmission line design, mechanical loading (Weight, Ice, Wind) dominates over thermal effects from current flow for sag calculations.