Join 60,000+ competitive exam aspirants
Insulators may fail due to
Flash over
Short circuit
Deposition of dust
Any of above
Any of above
Insulator failure occurs when the insulating medium loses its dielectric strength or when conductive paths are formed across the surface, leading to a breakdown. Failure can be attributed to electrical, mechanical, or environmental stresses that compromise the integrity of the porcelain or glass materials used in power transmission lines.
Insulator failure occurs when the insulating medium loses its dielectric strength or when conductive paths are formed across the surface, leading to a breakdown. Failure can be attributed to electrical, mechanical, or environmental stresses that compromise the integrity of the porcelain or glass materials used in power transmission lines.
VflashoverтАЛ>VoperatingтАЛ тАФ flashover occurs when voltage exceeds air insulation capability
EdielectricтАЛ=dVтАЛ тАФ electric field intensity within the insulator dielectric
Flashover is an discharge around the insulator, while puncture is a discharge through the material.
Polluted insulators exhibit lower surface resistance, increasing leakage current.
Mechanical failure (cracking) also renders insulators useless.
Standard insulators must withstand impulse voltage tests to ensure reliability.
High dielectric strength
Good mechanical tensile strength
Susceptibility to environmental degradation
Fragility (porcelain)
Overhead transmission lines
Substation busbar support
Flashover is considered a 'non-destructive' failure if the circuit breaker interrupts the arc quickly enough to prevent permanent damage.
Puncture is a 'destructive' failure; the insulator must be replaced if punctured.
D is correct тАФ Insulators fail due to a combination of electrical discharge (flashover), structural breakdown (puncture), and environmental factors such as dust/pollutants creating leakage paths.
Always distinguish between 'Flashover' (around the insulator) and 'Puncture' (through the insulator); exams often test this distinction to differentiate between external and internal faults.