Join 60,000+ competitive exam aspirants
It is preferable to connect bulbs in series or in parallel?
Series
Parallel
Both series and parallel
Neither series nor parallel
Parallel
Connecting bulbs in parallel is preferable because it ensures that each bulb receives the full rated voltage of the source, regardless of the number of bulbs connected. In a parallel circuit, if one bulb fails, the remaining bulbs continue to operate independently because they remain connected to the voltage supply.
Connecting bulbs in parallel is preferable because it ensures that each bulb receives the full rated voltage of the source, regardless of the number of bulbs connected. In a parallel circuit, if one bulb fails, the remaining bulbs continue to operate independently because they remain connected to the voltage supply.
V=V1тАЛ=V2тАЛ=VnтАЛ тАФ Voltage remains constant in parallel
ItotalтАЛ=I1тАЛ+I2тАЛ+InтАЛ тАФ Total current is the sum of branch currents
P=RV2тАЛ тАФ Power consumed by each bulb
In a parallel configuration, the potential difference (voltage) across each branch remains constant (VtotalтАЛ=V1тАЛ=V2тАЛ=...=VnтАЛ). This allows each load to operate at its designed power rating. Conversely, in a series circuit, the total voltage is divided among the components (VtotalтАЛ=V1тАЛ+V2тАЛ+...+VnтАЛ), resulting in reduced brightness for each bulb, and the failure of a single bulb breaks the entire circuit loop, causing all others to extinguish.
Parallel connection maintains constant rated voltage across all loads.
Individual control (switching) is possible for each bulb in parallel.
Total resistance decreases as more parallel branches are added.
Series circuits lead to voltage drops proportional to resistance ratios.
Uniform voltage across all components
Independent operation of bulbs
High reliability: one fault does not affect the whole network
Increased wiring complexity and cost
Requires larger gauge wire to carry higher total current
No automatic current limiting effect as in series circuits
Domestic house wiring
Street lighting systems
Industrial power distribution
| Feature | Series | Parallel |
|---|---|---|
Voltage Distribution | Divided (V=╬гViтАЛ) | Constant (V=V1тАЛ=ViтАЛ) |
Failure Impact | Entire circuit turns off | Individual components continue |
Series connection is rare for lighting but used for decorative serial strings (like Xmas lights) where high current is not a constraint.
Option A is incorrect because in series circuits, bulbs consume less power as PтИЭI2R, and failure of one bulb acts as an open circuit.
B is correct тАФ Parallel connection ensures that all bulbs receive the full rated supply voltage, allowing them to operate at their intended brightness independently.
Remember: Parallel = Constant Voltage (best for power distribution), Series = Constant Current (used in sensors/measurements).