Join 60,000+ competitive exam aspirants
Large size steam plants and nuclear plants are suitable for
Peak loads
Intermediate loads
Base loads
Both base and peak loads
Base loads
Large steam and nuclear power plants are characterized by high capital costs and low operating (fuel) costs, making them economically efficient only when operated continuously. They are designed to operate at high capacity factors to serve the base load of the grid, which is the minimum constant demand present throughout the day.
Large steam and nuclear power plants are characterized by high capital costs and low operating (fuel) costs, making them economically efficient only when operated continuously. They are designed to operate at high capacity factors to serve the base load of the grid, which is the minimum constant demand present throughout the day.
Capacity┬аFactor=MaximumPossibleEnergyingivenperiodActualEnergyGeneratedтАЛ
Cost┬аper┬аkWh=TotalEnergyGeneratedFixed┬аCosts+VariableCostsтАЛ
The principle relies on the 'Capacity Factor' and 'Economic Dispatch'. Thermal and nuclear plants have slow response times to load changes (low ramp rates) and high startup costs. By maintaining a constant output, they minimize the cost per unit of electricity generated (kWh), thereby serving as base load stations while peak demand fluctuations are handled by faster-responding hydro or gas plants.
Base load plants operate at a high capacity factor, typically 80% to 90%.
Nuclear plants have high fixed costs due to complex safety systems but very low marginal fuel costs.
Thermal (Coal) plants have high inertia and take hours to start, making them unsuitable for rapid load following.
Peak loads are generally handled by Hydro-electric (Pumped Storage) or Gas Turbine power plants.
Low fuel cost per unit produced
High reliability for constant power supply
High initial capital expenditure
Slow ramp-up and ramp-down capability
Industrial grid supply
Urban residential base demand
| Feature | Base Load | Peak Load |
|---|---|---|
Characteristic | Base Load Plant | Peak Load Plant |
Capacity Factor | High | Low |
Base load: Minimum level of demand on an electrical grid over 24 hours.
Peak load: The time of high demand, usually in the evening, requiring fast-start generation.
C is correct тАФ Large steam and nuclear plants are base load stations because they are most economical when operated at a steady, constant high power output.
Always remember: If a plant has a high startup cost or slow ramp rate, it is intended for the base load; if it has a fast startup (like hydro/gas), it is intended for peak load.