Join 60,000+ competitive exam aspirants
Maximum demand tariff is generally not applied to the domestic consumers due to their
Low maximum demand
Load factor
Low power factor
Low energy consumption
Low maximum demand
Maximum demand tariff is not applied to domestic consumers because the cost of installing and maintaining a maximum demand indicator (MDI) at every residential connection outweighs the revenue benefits. Domestic loads typically exhibit very low maximum demand and significant diversity, making flat-rate or simple block-rate tariffs more economically viable for utilities.
Maximum demand tariff is not applied to domestic consumers because the cost of installing and maintaining a maximum demand indicator (MDI) at every residential connection outweighs the revenue benefits. Domestic loads typically exhibit very low maximum demand and significant diversity, making flat-rate or simple block-rate tariffs more economically viable for utilities.
Total┬аCost=AтЛЕ(kWmaxтАЛ)+BтЛЕ(kWh) тАФ where A is the demand charge rate and B is the energy charge rate.
The Maximum Demand tariff is based on the highest power (kW or kVA) recorded over a specific time interval (usually 15-30 minutes). Because domestic users have low peak demands, the capital expenditure of complex metering equipment per kilowatt of demand is disproportionately high. Instead, utilities use energy-based (kWh) billing to minimize metering complexity.
Domestic consumers have a very low load factor, meaning their usage is highly intermittent.
Maximum demand indicators are expensive instruments compared to standard induction/smart kWh meters.
The diversity factor of a domestic feeder is high, which benefits the utility without needing individual MD metering.
Fixed charges are often simplified in domestic tariffs to cover basic infrastructure costs without measuring peak load.
Encourages industrial users to improve load factor.
Reflects the actual capacity reserved by the consumer in the power system.
Requires costly MDI or smart metering hardware.
Complex to explain to residential end-users.
Industrial high-voltage consumers.
Large commercial complexes.
Public traction systems.
A Maximum Demand indicator integrates the current over a period (e.g., 30 mins) to identify the peak load.
Option B (Load Factor) is usually high for industrial consumers, not domestic.
Option C (Low Power Factor) is typically handled by kVAh billing rather than MD tariff.
A is correct тАФ Domestic consumers possess low maximum demand, making the high cost of specialized maximum demand metering instrumentation economically unjustifiable.
Always remember that in power systems, tariff structures are designed to balance the cost of metering equipment against the accuracy of billing; if the cost of metering exceeds the marginal gain, utilities default to simpler models.