Join 60,000+ competitive exam aspirants
Maximum permissible span with wooden pole is
20 m
30 m
50 m
100 m
50 m
Wooden poles are primarily utilized for low-voltage distribution lines (typically 11 kV or lower) due to their cost-effectiveness and ease of installation. In overhead transmission and distribution systems, the maximum permissible span for these poles is limited to 50 meters to prevent excessive sagging and structural failure under load.
Wooden poles are primarily utilized for low-voltage distribution lines (typically 11 kV or lower) due to their cost-effectiveness and ease of installation. In overhead transmission and distribution systems, the maximum permissible span for these poles is limited to 50 meters to prevent excessive sagging and structural failure under load.
S=8TwL2тАЛ тАФ where S is sag, w is weight/unit length, L is span, and T is conductor tension.
The span length is fundamentally determined by the mechanical strength of the pole and the sag of the conductor. As the span increases, the sag (S=8TwL2тАЛ) increases, requiring higher tension or taller poles to maintain required ground clearance, which wooden structures cannot support effectively without risking buckling.
Wooden poles are generally used for voltages up to 11 kV.
The 50 m limit is a standard design constraint to maintain safety clearances.
Wooden poles have low mechanical strength compared to steel or concrete structures.
Span length is influenced by terrain and conductor material properties.
Economical for short-distance rural electrification.
Lightweight and easy to transport in rugged terrains.
Susceptible to rot, termites, and fire.
Limited mechanical strength compared to steel tubular poles.
Short life span (approx 10-15 years without treatment).
Low voltage (LV) distribution lines.
Temporary construction site power supply.
Rural electrification projects.
Steel tubular poles can support spans of 50-80 meters.
Reinforced Concrete (RCC) poles allow spans of 80-100 meters.
Steel lattice towers are used for long-distance high-voltage lines with spans exceeding 200-300 meters.
C is correct тАФ The maximum permissible span for a wooden pole is 50 meters, primarily due to its mechanical limitations and sag considerations.
Always remember the hierarchy of span lengths: Wooden (50m) < Steel Tubular (80m) < RCC (100m) < Steel Lattice (>200m).