Join 60,000+ competitive exam aspirants
Wooden poles are used as line support for
11 kV
22 kV
66 kV
400 kV
22 kV
Wooden poles are typically used as line supports for low and medium voltage distribution lines, generally up to 22 kV. They are chosen for their cost-effectiveness and ease of installation in rural electrification projects where the span and voltage requirements are moderate.
Wooden poles are typically used as line supports for low and medium voltage distribution lines, generally up to 22 kV. They are chosen for their cost-effectiveness and ease of installation in rural electrification projects where the span and voltage requirements are moderate.
VmaxтАЛтЙИ22┬аkV тАФ Typically the upper voltage limit for wooden structures in standard distribution.
Wooden poles provide mechanical support for overhead conductors while ensuring sufficient ground clearance. Their insulation properties are limited by moisture absorption and decay, making them unsuitable for higher voltages where creepage distance and mechanical strength requirements are significant.
Wooden poles are made from treated timber (like Creosote) to prevent rotting.
Used extensively for local distribution systems.
Limited by mechanical strength and atmospheric degradation.
Span length for wooden poles is usually between 40 to 50 meters.
Low initial cost
Lightweight and easy to transport
Good insulation properties in dry conditions
Subject to decay and termite attack
Lower mechanical strength compared to steel
Frequent maintenance required
Rural distribution lines
Temporary overhead connections
Low voltage distribution systems
For voltages above 66 kV, steel lattice towers are preferred due to the high mechanical tension of conductors and the required height.
Wooden poles are rarely used for systems above 22 kV due to the high risk of flashover and insufficient structural stability under high tension.
B is correct тАФ Wooden poles are primarily restricted to low and medium voltage distribution networks, commonly up to 22 kV.
Always remember: wooden poles = low voltage, concrete/steel = medium voltage, lattice towers = high/extra-high voltage.