Join 60,000+ competitive exam aspirants
Maximum wind energy available is proportional to
Air density
(Wind┬аvelocity)3
(Rotor┬аdiameter)2
All of above
(Wind┬аvelocity)3
The maximum power available in wind is given by the kinetic energy per unit time of the flowing air mass. This power is directly proportional to the air density, the cross-sectional area swept by the turbine blades, and the cube of the wind velocity.
The maximum power available in wind is given by the kinetic energy per unit time of the flowing air mass. This power is directly proportional to the air density, the cross-sectional area swept by the turbine blades, and the cube of the wind velocity.
P=21тАЛ╧БAv3 тАФ Total power available in wind
PmaxтАЛ=2716тАЛP тАФ Betz Limit (Max extractable power)
Wind power is derived from the kinetic energy of air (KE=21тАЛmv2). Since mass flow rate m╦Щ=╧БAv (where ╧Б is density, A is rotor area, and v is velocity), the power P=21тАЛm╦Щv2=21тАЛ╧БAv3. Because the rotor area A=╧Аr2=╧А(D/2)2, the power is also proportional to the square of the rotor diameter D2.
Air density ╧Б varies with altitude and temperature.
Power is extremely sensitive to wind speed due to the cubic relationship (v3).
Doubling the rotor diameter increases power output by a factor of 4.
Renewable and sustainable energy source.
Low operational and maintenance costs post-installation.
Intermittent nature of wind resource.
High initial capital investment for turbine structures.
Grid-connected wind farms.
Off-grid power generation for remote locations.
The area A is calculated as ╧Аr2=╧А(D/2)2, hence AтИЭD2.
Option B is correct because power тИЭv3, but since all three parameters are factors, 'All of the above' is the comprehensive answer.
D is correct тАФ The power available in wind is defined by P=21тАЛ╧БAv3, making it proportional to air density, rotor area (square of diameter), and the cube of wind velocity.
Always remember the v3 relationship; in competitive exams, even a small increase in wind speed results in a massive increase in power output.