Join 60,000+ competitive exam aspirants
Maximum possible efficiency of wind power plant is
30%
48%
59%
65%
59%
The maximum efficiency of a wind turbine is limited by the Betz limit, which dictates that no wind turbine can capture more than 59.3% of the kinetic energy of the wind. This theoretical limit is derived from the principles of fluid dynamics and conservation of mass and momentum.
The maximum efficiency of a wind turbine is limited by the Betz limit, which dictates that no wind turbine can capture more than 59.3% of the kinetic energy of the wind. This theoretical limit is derived from the principles of fluid dynamics and conservation of mass and momentum.
CpтАЛ=PwindтАЛProtorтАЛтАЛ=0.593
P=21тАЛ╧БAv3
As air passes through the turbine rotor, its velocity decreases. If the wind were stopped completely (efficiency 100%), no more air would pass through the rotor disk, and no power would be generated. If the wind passed through unimpeded (efficiency 0%), no energy would be extracted. The Betz limit represents the optimal balance where the velocity is reduced to one-third of its upstream value to extract maximum power.
The limit applies to all horizontal-axis wind turbines (HAWT).
It is independent of the turbine design, blade shape, or size.
Real-world turbines typically achieve 35% to 45% efficiency due to friction and turbulence.
The factor 16/27 represents the theoretical maximum power coefficient (CpтАЛ).
Clean and renewable energy source
Low operating and maintenance costs
Intermittent power output
Cannot exceed theoretical fluid dynamic limits
Grid-connected wind farms
Off-grid battery charging systems
The value 59.3% is frequently rounded to 59% in competitive exam MCQs.
Option A (30%) is a typical efficiency for older or smaller turbines.
Option D (65%) is physically impossible according to the Betz Law.
C is correct тАФ The maximum theoretical efficiency of a wind turbine, known as the Betz limit, is 59.3%.
Remember that while the theoretical limit is ~59%, practical turbines are efficiency-limited by tip-speed ratios and blade profile losses.