Join 60,000+ competitive exam aspirants
Which type of wind power plants are termed as cross wind axis machine
Horizontal axis wind machines
Vertical axis wind machines
Both (a) and (b)
None of above
Vertical axis wind machines
Vertical axis wind turbines (VAWTs) are termed 'cross-wind axis machines' because their axis of rotation is perpendicular to the wind direction. Unlike Horizontal Axis Wind Turbines (HAWTs) that must 'yaw' to face the wind, VAWTs accept wind from any direction, making them omnidirectional.
Vertical axis wind turbines (VAWTs) are termed 'cross-wind axis machines' because their axis of rotation is perpendicular to the wind direction. Unlike Horizontal Axis Wind Turbines (HAWTs) that must 'yaw' to face the wind, VAWTs accept wind from any direction, making them omnidirectional.
T=F├Чr тАФ torque generated where F is the aerodynamic force and r is the radius
P=21тАЛ╧БAv3CpтАЛ тАФ power available from wind, representing the kinetic energy extraction
The principle of operation relies on the rotor blades moving across the wind stream. As the wind flows through the turbine, the lift or drag forces generated on the blades create torque regardless of the wind's instantaneous orientation. This removes the need for complex yaw control mechanisms found in traditional HAWTs.
VAWTs do not require a yaw mechanism to track wind direction.
The rotor assembly of a VAWT is typically mounted on a vertical shaft.
Common designs include the Darrieus (lift-based) and Savonius (drag-based) rotors.
VAWTs are generally easier to maintain as the gearbox and generator are located at the base.
Omnidirectional (accepts wind from any direction)
Lower center of gravity, facilitating easier maintenance
Less noise pollution compared to HAWTs
Better performance in turbulent wind conditions
Lower overall aerodynamic efficiency compared to HAWTs
Higher fatigue stress on turbine blades
Difficult to start without an external motor in some designs
Small-scale urban wind power generation
Remote off-grid power installations
Roof-mounted wind turbines in residential areas
| Feature | Horizontal Axis | Vertical Axis |
|---|---|---|
Wind Orientation | Parallel to shaft | Perpendicular to shaft |
Yaw Mechanism | Required | Not required |
The term 'cross-flow' or 'cross-wind' is specifically associated with the vertical configuration where the airfoil traverses the wind stream.
Option A is incorrect because HAWTs operate with the main shaft parallel to the wind flow, requiring active yawing.
B is correct тАФ Vertical axis wind machines are classified as cross-wind axis machines because the rotor axis is set at a right angle to the direction of the wind.
Remember that HAWTs are 'upwind' or 'downwind' systems, whereas VAWTs are inherently 'cross-wind' because they operate regardless of wind heading.