Join 60,000+ competitive exam aspirants
Metallic shielding provided on cable is usually of thickness
0.1 to 0.8 mm
3 to 5 mm
10 to 15 mm
15 to 25 mm
3 to 5 mm
Metallic shielding in underground cables, typically made of lead or aluminum, is provided to confine the electric field within the cable dielectric and to ensure a uniform radial distribution of flux. A standard thickness of 3 to 5 mm is generally maintained to provide adequate mechanical protection and fault current carrying capacity.
Metallic shielding in underground cables, typically made of lead or aluminum, is provided to confine the electric field within the cable dielectric and to ensure a uniform radial distribution of flux. A standard thickness of 3 to 5 mm is generally maintained to provide adequate mechanical protection and fault current carrying capacity.
E=rln(R/r)VтАЛ тАФ Electric field stress at radius r in a single core cable
C=ln(R/r)2╧А╧╡0тАЛ╧╡rтАЛтАЛ тАФ Capacitance per unit length of the cable
The metallic sheath acts as an earthed barrier that prevents leakage current and protects the insulation from moisture. It ensures that the tangential components of the electric stress are eliminated, preventing surface discharges or 'tracking' at the insulation surface. By providing a low-resistance path for fault currents, it also helps in the operation of protective relays during cable insulation breakdown.
The metallic sheath maintains a uniform electric field within the cable insulation.
It prevents the ingress of moisture, which is critical for the longevity of paper-insulated cables.
The sheath provides a mechanical barrier against external impacts and environmental stresses.
It carries the capacitive charging current and fault current back to the source.
Uniform stress distribution across the dielectric
Effective protection against moisture and chemical corrosion
Provides a low impedance path for short-circuit currents
Increases the overall diameter and weight of the cable
Introduces sheath losses due to eddy currents in AC systems
Requires proper bonding and grounding to prevent sheath circulating currents
High voltage power transmission cables
Submarine and underground distribution networks
Industrial shielded control cables
The 3-5 mm range is standard for medium voltage lead-sheathed cables; for high voltage cables, the thickness might vary based on pressure-type requirements (e.g., oil-filled cables).
Option A (0.1-0.8 mm) is generally too thin for primary mechanical protection, typically used for thin metallic tapes in light duty shielding.
B is correct тАФ Metallic shielding in power cables is designed with a thickness of 3 to 5 mm to provide sufficient mechanical integrity and electrical shielding efficacy.
Always remember that metallic sheaths are part of the 'Electrostatic Shielding' requirement, which is more critical in cables rated above 11 kV to prevent partial discharges.