Join 60,000+ competitive exam aspirants
No load primary current in a transformer
lags behind applied voltage somewhat less than 90 degree
lags behind applied voltage by exactly 90 degree
leads the applied voltage by exactly 90 degree
leads the applied voltage somewhat less than 90 degree
lags behind applied voltage somewhat less than 90 degree
The no-load primary current (I0тАЛ) consists of two components: the magnetizing component (ImтАЛ) and the core-loss component (IwтАЛ). Since ImтАЛ lags the voltage by 90┬░ and IwтАЛ is in phase with the voltage, their phasor sum I0тАЛ lags behind the applied voltage by an angle ╧Х0тАЛ which is slightly less than 90┬░.
The no-load primary current (I0тАЛ) consists of two components: the magnetizing component (ImтАЛ) and the core-loss component (IwтАЛ). Since ImтАЛ lags the voltage by 90┬░ and IwтАЛ is in phase with the voltage, their phasor sum I0тАЛ lags behind the applied voltage by an angle ╧Х0тАЛ which is slightly less than 90┬░.
I0тАЛ=Im2тАЛ+Iw2тАЛтАЛ тАФ Total no-load current magnitude
╧Х0тАЛ=arccos(I0тАЛIwтАЛтАЛ) тАФ Phase angle of no-load current
When a transformer is on no-load, the primary winding draws a small current from the source to create the magnetic flux in the core and provide for hysteresis and eddy current losses. The magnetizing component (ImтАЛ) is purely inductive, causing a 90┬░ lag, while the core-loss component (IwтАЛ) provides real power to overcome losses. The vector addition I0тАЛтАЛ=ImтАЛтАЛ+IwтАЛтАЛ results in a current that lags the voltage by ╧Х0тАЛ=cosтИТ1(I0тАЛIwтАЛтАЛ), where ╧Х0тАЛ<90┬░.
The no-load power factor of a transformer is usually very low (typically 0.15 to 0.25 lagging).
The magnetizing current (ImтАЛ) is responsible for producing the alternating flux (╬ж).
The core-loss current (IwтАЛ) compensates for hysteresis and eddy current losses in the iron core.
Provides a direct measure of core losses in the transformer.
Essential for determining the magnetizing reactance of the transformer.
High no-load current leads to poor system power factor.
Cannot be used to estimate copper losses as they are negligible at no-load.
Used in Open Circuit Tests to calculate constant losses.
Helps in designing the excitation system for transformers.
The value of I0тАЛ is typically 2% to 5% of the full-load rated current.
Option B is incorrect because real transformers always have core losses, preventing the current from lagging by exactly 90┬░.
A is correct тАФ the no-load primary current vector is the sum of the magnetizing component and the core-loss component, resulting in a lag of slightly less than 90┬░.
Always remember that in an ideal inductor, the current lags by 90┬░, but because practical iron cores have losses, real-world components shift this angle closer to the voltage vector.