Join 60,000+ competitive exam aspirants
Ohm's law is not applicable to
DC circuits
high currents
small resistors
semi-conductors
semi-conductors
Ohm's Law states that current is directly proportional to potential difference in a conductor at a constant temperature. Semi-conductors are non-ohmic devices because their V-I characteristic is non-linear and sensitive to factors like temperature and doping concentration.
Ohm's Law states that current is directly proportional to potential difference in a conductor at a constant temperature. Semi-conductors are non-ohmic devices because their V-I characteristic is non-linear and sensitive to factors like temperature and doping concentration.
V=IR тАФ Ohm's Law for linear conductors
I=I0тАЛ(enkTqVтАЛтИТ1) тАФ Shockley diode equation for semiconductors
In metallic conductors, the mobility of charge carriers is constant, resulting in a constant resistance R=V/I. In semiconductors, the number of charge carriers (electrons and holes) changes exponentially with temperature and the applied voltage, causing the resistance to vary dynamically with the current flow.
Ohm's law applies strictly to linear elements where R is independent of V and I.
Semiconductors like diodes and transistors exhibit non-linear current-voltage relationships.
Bilateral components like resistors follow Ohm's law, while unilateral ones like diodes do not.
Temperature changes in non-ohmic devices cause dynamic resistance shifts.
Ohmic devices simplify complex circuit analysis using superposition.
Non-ohmic devices like diodes are essential for rectification and logic switching.
Non-linear components complicate standard mesh/nodal analysis calculations.
Non-ohmic components are highly susceptible to thermal runaway.
Power distribution (Ohmic)
Electronic signal processing and rectification (Non-Ohmic)
Vacuum tubes, gas-filled tubes, and discharge lamps are also non-ohmic.
Option A is incorrect because DC circuits frequently use resistors that follow Ohm's law.
Option B is incorrect because high current alone does not invalidate Ohm's law unless it causes temperature-induced resistance changes.
Option C is incorrect as the size of the resistor does not dictate non-ohmic behavior.
D is correct тАФ Semi-conductors are non-ohmic devices because their current-voltage relationship is non-linear and dependent on external conditions.
Always remember that Ohm's law is a material property restriction; if the slope of the V-I curve is not constant, the component is non-ohmic.