Join 60,000+ competitive exam aspirants
Permissible pH value of water for steam boilers is
Slightly more than seven
Slightly less than seven
Unity
Zero
Slightly more than seven
The pH value of boiler feed water is maintained slightly above 7, typically between 8.5 and 9.5, to prevent corrosion of the boiler metal. An alkaline environment ensures the formation of a protective magnetite layer on the steel surface.
The pH value of boiler feed water is maintained slightly above 7, typically between 8.5 and 9.5, to prevent corrosion of the boiler metal. An alkaline environment ensures the formation of a protective magnetite layer on the steel surface.
pH=тИТlog10тАЛ[H+] тАФ Definition of pH
Fe+2H+тЖТFe2++H2тАЛ тАФ Corrosion reaction mechanism in acidic conditions
In an acidic environment (pH < 7), hydrogen ions attack the boiler's mild steel tubes, causing rapid dissolution of iron. By keeping the pH slightly alkaline, the concentration of OHтИТ ions is increased, which facilitates the passivation of iron surfaces and inhibits the electrochemical corrosion reaction Fe+2H+тЖТFe2++H2тАЛ.
Ideal boiler feed water pH range is 8.5 to 9.5.
Highly alkaline water (pH > 11) leads to caustic embrittlement.
Acidic water causes pitting and general corrosion.
pH control is essential for the longevity of high-pressure boiler tubes.
Reduces downtime due to tube failure
Prevents pitting and surface deterioration
Increases the operational lifespan of the boiler pressure parts
Requires constant chemical dosing (e.g., hydrazine or morpholine)
Excessive alkalinity may cause caustic embrittlement
Thermal Power Plants
Industrial Steam Boilers
High-Pressure Process Heaters
Standard water treatment for power boilers follows strict guidelines (e.g., IBR or ASME standards) to maintain chemical balance.
Option B is incorrect because pH < 7 indicates acidity, which promotes corrosion in metallic boiler parts.
A is correct тАФ The pH of boiler water must be slightly greater than 7 to maintain a non-corrosive, alkaline environment.
Always remember that for power systems, alkaline conditions are preferred to protect piping from oxygen-induced and acid-induced corrosion.