Join 60,000+ competitive exam aspirants
Power factor improvement by synchronous condenser have drawback of
Comparatively higher maintenance and operating cost
Requirement of auxiliary equipment for starting
Possibility of falling out of synchronism causing in interruption of supply
All of above
All of above
A synchronous condenser is an over-excited synchronous motor running at no-load to improve power factor. While effective for voltage regulation and VAR compensation, it suffers from significant drawbacks including high maintenance needs, complex starting requirements, and potential instability.
A synchronous condenser is an over-excited synchronous motor running at no-load to improve power factor. While effective for voltage regulation and VAR compensation, it suffers from significant drawbacks including high maintenance needs, complex starting requirements, and potential instability.
QcompтАЛ=VcdotIleadingтАЛsin(╧Х) тАФ Reactive power compensation provided by the machine
When a synchronous motor is over-excited, its back EMF exceeds the supply voltage, causing it to draw leading reactive current from the source. This enables it to act as a variable capacitor. However, as a rotating machine, it requires mechanical maintenance and synchronization, unlike static capacitors.
Synchronous condensers provide smooth, stepless reactive power control.
Unlike capacitors, they contribute to fault current during short circuits.
Higher losses occur due to rotational friction and windage.
Maintenance cost is high because it contains moving parts (bearings, brushes).
Stepless variable reactive power support
Provides voltage regulation capability
Can operate in both leading and lagging modes
High maintenance and capital costs
Auxiliary starting equipment required
Lower efficiency than static capacitors
Possibility of instability during transient disturbances
Large-scale industrial power factor correction
Voltage stability support in transmission systems
A synchronous condenser is essentially a synchronous motor running at zero load.
Static capacitors are preferred for smaller loads due to low maintenance and lower costs.
D is correct тАФ Synchronous condensers are high-maintenance rotating machines that require auxiliary starting equipment and are prone to synchronization loss under transient conditions.
Always remember that for static PFC (capacitors), maintenance is negligible, whereas for synchronous machines, the mechanical complexity adds significant operating overhead.