Join 60,000+ competitive exam aspirants
Pulverized fuel is used for
Better burning
Increased calorific value of coal
Less radiation loss
Medium size units
Better burning
Pulverized fuel, or coal dust, is used in thermal power plants to facilitate high-efficiency combustion. By grinding coal into a fine powder (similar to talcum powder), the surface area exposed to air increases drastically, allowing for rapid and nearly complete oxidation.
Pulverized fuel, or coal dust, is used in thermal power plants to facilitate high-efficiency combustion. By grinding coal into a fine powder (similar to talcum powder), the surface area exposed to air increases drastically, allowing for rapid and nearly complete oxidation.
RтИЭS
Where R is the reaction rate and S is the exposed surface area of the fuel.
When fuel is pulverized, its surface-to-volume ratio increases significantly. This allows the fuel particles to be carried by primary air into the furnace, where they burn in suspension. This 'suspension firing' approach mimics gas-like combustion properties, resulting in extremely high combustion efficiency and the ability to control the flame temperature precisely.
Pulverization turns solid coal into a dust-like consistency (typically 70% passing through 75-micron sieve).
Increased surface area leads to faster chemical reaction kinetics during combustion.
Suspension firing allows for instantaneous control of heat release.
Used extensively in large-capacity central station boilers.
Higher combustion efficiency
Rapid response to changes in load
Ability to burn low-grade coal effectively
Requires high power for pulverizing mills
Increased ash handling and dust collection requirements
Higher maintenance costs for wear and tear of burners and mills
Large-scale thermal power stations
Industrial boilers requiring high steaming rates
Pulverized fuel systems reduce the amount of excess air required for combustion, thereby reducing chimney heat losses.
Option B is incorrect because pulverization changes physical properties for combustion, not the chemical energy content (calorific value) of the fuel itself.
Option C is incorrect as radiation loss depends primarily on furnace insulation and geometry rather than fuel state.
Option D is incorrect as pulverized fuel is specifically preferred for very large units rather than medium-sized ones.
A is correct тАФ Pulverized fuel provides a massive increase in surface area, ensuring complete and rapid combustion.
In exams, remember that 'Pulverized' always links to 'Surface Area' and 'Combustion Efficiency' improvements.