Join 60,000+ competitive exam aspirants
The advantage of using pulverized fuel include
Higher boiler efficiency, low air requirement and low fan power
Easy and complete combustion
Fast response to load changes and low banking losses
All of above
Higher boiler efficiency, low air requirement and low fan power
Pulverized fuel firing involves grinding coal into a fine powder (usually less than 75 microns) to increase the effective surface area for combustion. This process results in rapid, efficient burning and high boiler performance, making it the standard in modern thermal power plants.
Pulverized fuel firing involves grinding coal into a fine powder (usually less than 75 microns) to increase the effective surface area for combustion. This process results in rapid, efficient burning and high boiler performance, making it the standard in modern thermal power plants.
Q=mтЛЕCvтАЛ тАФ represents total heat released during combustion where CvтАЛ is calorific value
VolumeSurfaceAreaтАЛтИЭr1тАЛ тАФ demonstrates that decreasing particle radius r exponentially increases reaction rate
The pulverized coal is injected into the furnace with a stream of preheated primary air. Due to the fine particle size, the fuel behaves like a fluid, allowing for near-instantaneous mixing with secondary air. This ensures complete combustion with minimal excess air, significantly reducing thermal losses and improving the boiler's response time to varying load demands.
Pulverized fuel allows for the utilization of low-grade coals.
Higher combustion temperatures lead to improved thermal efficiency.
Reduced air requirement minimizes the mass of flue gases, thereby decreasing chimney losses.
Banking losses are significantly reduced compared to stoker-fired boilers.
Higher boiler efficiency
Easy and complete combustion
Fast response to load changes
Low maintenance of fuel handling
High initial investment for pulverizing mills
Requires complex dust collection equipment like electrostatic precipitators
Risk of furnace explosions if not handled correctly
Large-scale utility thermal power plants
Industrial high-pressure steam boilers
Pulverization ensures that almost 70-80% of coal particles pass through a 75-micron sieve.
Option A is correct but incomplete as B and C are also valid advantages.
Banking losses refer to fuel wasted during idle or low-load operation; pulverized fuel systems minimize this by shutting down injection quickly.
D is correct тАФ pulverized fuel firing offers superior combustion efficiency, rapid load response, and reduced thermal losses through optimized air-fuel mixing.
When answering combustion questions, remember that surface-area-to-volume ratio is the primary driver for reaction speed in any fuel system, whether solid or liquid.