Join 60,000+ competitive exam aspirants
The drawbacks of using pulverized fuel include
Additional investment in pulverizing plant and stack fly ash removal equipment
Extra power requirements for the pulverizing plant
Reduced power plant efficiency
Both (a) and (b)
Both (a) and (b)
Pulverized fuel firing involves grinding coal into a fine powder (usually less than 75 microns) to improve combustion efficiency. While this increases the surface-area-to-volume ratio and allows for rapid combustion, it necessitates complex support systems including pulverizing mills and electrostatic precipitators, leading to significant capital and operational costs.
Pulverized fuel firing involves grinding coal into a fine powder (usually less than 75 microns) to improve combustion efficiency. While this increases the surface-area-to-volume ratio and allows for rapid combustion, it necessitates complex support systems including pulverizing mills and electrostatic precipitators, leading to significant capital and operational costs.
EauxтАЛ=PmillтАЛ+PfansтАЛ тАФ Represents auxiliary power consumption where mills are the primary contributors in pulverized systems
SA=DpтАЛ6тАЛ тАФ Specific surface area of coal particles inversely proportional to diameter DpтАЛ
In a pulverized fuel system, coal is dried and ground in a mill (ball or bowl mill) before being injected into the furnace with primary air. The increased surface area ensures near-complete combustion, but requires high-capacity fans and large electrostatic precipitators to manage the resulting large volumes of fly ash suspended in the flue gases. The mechanical energy required to run these mills accounts for a significant portion of the plant's auxiliary power consumption (parasitic load).
Pulverized fuel allows for quick response to load changes.
Combustion efficiency is much higher compared to stoker firing.
Requires complex flue gas cleaning due to high fly ash content.
High maintenance costs due to abrasive nature of coal dust on mill parts.
High combustion efficiency
Rapid response to load fluctuations
Ability to use lower grade coal
High initial investment in grinding equipment
High auxiliary power consumption
Extensive fly ash disposal and collection requirements
High maintenance due to wear and tear
Utility scale thermal power plants
Large-scale industrial boilers
Option C is incorrect because pulverized firing actually increases combustion efficiency, though the net plant efficiency may be impacted by high auxiliary consumption.
The process involves grinding coal until at least 70% passes through a 200-mesh sieve.
D is correct тАФ The use of pulverized fuel necessitates significant capital for grinding infrastructure and consumes considerable electrical power for mill operation.
In competitive exams, remember that 'Auxiliary Power Consumption' is a critical metric; pulverized coal plants typically consume 8-12% of their own generated power for station services, significantly higher than fluidised bed systems.