Join 60,000+ competitive exam aspirants
Range of wind speed suitable for wind power generation is
0 - 5 m/s
5 - 25 m/s
25 - 50 m/s
50 - 75 m/s
5 - 25 m/s
Wind power generation is only feasible within a specific velocity window known as the operational range. Wind turbines typically have a 'cut-in' speed (usually 3-5 m/s) to start, and a 'cut-out' speed (usually 25 m/s) to prevent structural damage, making 5-25 m/s the practical range for generation.
Wind power generation is only feasible within a specific velocity window known as the operational range. Wind turbines typically have a 'cut-in' speed (usually 3-5 m/s) to start, and a 'cut-out' speed (usually 25 m/s) to prevent structural damage, making 5-25 m/s the practical range for generation.
P=21тАЛ╧БAv3CpтАЛ тАФ Power available in the wind where ╧Б is air density, A is rotor swept area, v is wind velocity, and CpтАЛ is power coefficient.
Wind turbines convert the kinetic energy of air into mechanical energy using aerodynamic lift on rotor blades. The power available is proportional to the cube of the wind velocity, meaning higher speeds yield significantly more power until the cut-out speed is reached, where the turbine is braked to ensure mechanical safety.
Cut-in speed: The minimum wind speed required to generate net power (typically 3-5 m/s).
Rated speed: The speed at which the turbine reaches its maximum design power output.
Cut-out speed: The upper wind speed limit (usually 25 m/s) to prevent mechanical failure due to high structural loads.
Power is proportional to the cube of velocity, making location selection critical.
Renewable and inexhaustible energy source.
Zero emission of pollutants during operation.
Intermittent nature of wind resource.
High initial capital investment and potential noise/visual impact.
Utility-scale wind farms for grid integration.
Off-grid battery charging for remote telecommunications.
Speeds above 25 m/s involve extreme turbulence and forces that threaten turbine integrity.
Below 5 m/s, the energy extracted is insufficient to overcome internal friction and parasitic losses.
B is correct тАФ 5 - 25 m/s represents the standard operational wind speed range for commercial wind turbines.
Remember that wind power is a cubic function of velocity (PтИЭv3); even small increases in wind speed significantly boost energy yield, which is why siting turbines at higher altitudes or coastal areas is preferred.