Join 60,000+ competitive exam aspirants
Rankine cycle efficiency of a steam power plant is in the range of
20 тАУ 30 %
30 тАУ 45 %
45 тАУ 60 %
60 тАУ 80 %
30 тАУ 45 %
The thermal efficiency of a practical Rankine cycle used in modern steam power plants typically falls within the 30тАУ45% range. This value accounts for thermodynamic losses, turbine inefficiencies, and the limitations imposed by the Carnot cycle within the operating temperature bounds of water-steam systems.
The thermal efficiency of a practical Rankine cycle used in modern steam power plants typically falls within the 30тАУ45% range. This value accounts for thermodynamic losses, turbine inefficiencies, and the limitations imposed by the Carnot cycle within the operating temperature bounds of water-steam systems.
╬╖thтАЛ=1тИТQinтАЛQoutтАЛтАЛ тАФ Fundamental thermal efficiency definition
╬╖thтАЛ=h1тАЛтИТh4тАЛh1тАЛтИТh2тАЛтАЛ тАФ Enthalpy based efficiency for Rankine cycle
The Rankine cycle operates through four processes: isentropic compression in a pump, isobaric heat addition in a boiler, isentropic expansion in a turbine, and isobaric heat rejection in a condenser. The overall efficiency is limited by the maximum temperature of the superheated steam and the minimum temperature allowed by the cooling medium in the condenser.
Actual Rankine cycle efficiency is significantly lower than Carnot efficiency due to irreversible processes.
Efficiency can be increased by increasing boiler pressure or increasing steam superheat temperature.
Reheating and regenerative feed heating are common techniques to push efficiency toward the higher end of the 30-45% range.
High reliability for base-load power generation.
Capable of using various fuel sources including coal, nuclear, and biomass.
Relatively low efficiency compared to combined cycle power plants (~50-60%).
Requires significant water resources for the condensation process.
Coal-fired thermal power plants.
Nuclear power plants (as the secondary cycle).
Concentrated solar power plants.
Simple Rankine cycles without regeneration or reheating typically operate at 25-30% efficiency.
Modern subcritical and supercritical power plants achieve efficiencies in the 35-45% range.
Values > 50% are generally not achievable by the Rankine cycle alone and require combined cycles (Brayton + Rankine).
B is correct тАФ The Rankine cycle efficiency for practical steam power plants is generally maintained between 30% and 45%.
Always remember that the Rankine cycle is bounded by the Carnot limit; thus, increasing the mean temperature of heat addition is the most effective way to improve performance.