Join 60,000+ competitive exam aspirants
Steam power plants work closely on
Binary vapour cycle
Brayton cycle
Rankine cycle
Carnot cycle
Rankine cycle
Steam power plants operate on the Rankine cycle, which is the idealized thermodynamic cycle that describes the process by which heat engines extract work from a heat source while undergoing phase change of the working fluid (water). It mimics the practical operation of steam power stations involving boilers, turbines, condensers, and pumps.
Steam power plants operate on the Rankine cycle, which is the idealized thermodynamic cycle that describes the process by which heat engines extract work from a heat source while undergoing phase change of the working fluid (water). It mimics the practical operation of steam power stations involving boilers, turbines, condensers, and pumps.
╬╖rankineтАЛ=QinтАЛWnetтАЛтАЛ=1тИТh3тАЛтИТh2тАЛh4тАЛтИТh1тАЛтАЛ тАФ Thermal efficiency of the Rankine cycle
WnetтАЛ=WturbineтАЛтИТWpumpтАЛ тАФ Net work output
The cycle consists of four continuous processes: (1) Isentropic compression in a pump (1-2), (2) Isobaric heat addition in a boiler to produce superheated steam (2-3), (3) Isentropic expansion in a turbine to generate work (3-4), and (4) Isobaric heat rejection in a condenser to return steam to liquid state (4-1).
The Rankine cycle is a practical approximation of the Carnot cycle for steam power plants.
Efficiency is limited by the temperature of the heat source and the cooling medium in the condenser.
Superheating steam increases the average temperature at which heat is added, thus improving efficiency.
Regenerative feed water heating is often employed to further improve cycle efficiency.
Uses water, which is cheap, non-toxic, and readily available.
Allows for high power density and large-scale electricity generation.
Lower thermal efficiency compared to the ideal Carnot cycle.
Significant energy loss during the condensation process in the condenser.
Thermal Power Plants (Coal-fired, Oil-fired, Gas-fired)
Nuclear Power Plants (as the secondary side cycle)
Brayton cycle is used for Gas Turbine power plants.
Binary vapour cycle uses two working fluids (e.g., Mercury-Water) to improve efficiency.
Carnot cycle is the theoretical maximum efficiency cycle but is practically unrealizable for steam due to the difficulty of isothermal compression of a two-phase mixture.
C is correct тАФ Steam power plants operate on the thermodynamic cycle known as the Rankine cycle.
Remember: Gas turbines use the Brayton cycle, while steam-based thermal/nuclear plants use the Rankine cycle. These are favorite topics in competitive exams.