Join 60,000+ competitive exam aspirants
Ratio of line to line capacitance and line to neutral capacitance is
0.5
0.25
2
4
0.5
The line-to-line capacitance (CLLтАЛ) is the capacitance between two conductors of a transmission line, while the line-to-neutral capacitance (CLNтАЛ) is the capacitance between a conductor and the neutral point. In a balanced system, the ratio CLNтАЛCLLтАЛтАЛ is exactly 0.5 because CLLтАЛ is the series combination of two CLNтАЛ capacitors connected in a delta-star equivalent transformation.
The line-to-line capacitance (CLLтАЛ) is the capacitance between two conductors of a transmission line, while the line-to-neutral capacitance (CLNтАЛ) is the capacitance between a conductor and the neutral point. In a balanced system, the ratio CLNтАЛCLLтАЛтАЛ is exactly 0.5 because CLLтАЛ is the series combination of two CLNтАЛ capacitors connected in a delta-star equivalent transformation.
CLLтАЛ=2CLNтАЛтАЛ
CLNтАЛCLLтАЛтАЛ=0.5
In a three-phase system, the capacitance of each phase to neutral is CLNтАЛ. If we consider two lines, each has a capacitance CLNтАЛ to the ground (neutral). Between the two lines, there are two CLNтАЛ capacitances in series. The resultant capacitance between the two lines is CLLтАЛ=CLNтАЛ+CLNтАЛCLNтАЛ├ЧCLNтАЛтАЛ=0.5CLNтАЛ. Thus, the ratio CLNтАЛCLLтАЛтАЛ=0.5.
Line-to-line capacitance is effectively two line-to-neutral capacitances in series.
This relationship is crucial for calculating charging currents in transmission lines.
The neutral point acts as the reference for CLNтАЛ calculation.
Simplifies analysis of complex 3-phase networks.
Enables accurate calculation of shunt admittance parameters.
Assumes a perfectly balanced system.
Does not account for non-uniform spacing or ground proximity effects.
Power system steady-state analysis.
Calculation of transmission line shunt compensation.
The capacitance CLNтАЛ is often derived using the GMR (Geometric Mean Radius) and GMD (Geometric Mean Distance) of the conductor configuration.
Option B (0.25), C (2), and D (4) are incorrect as they do not satisfy the series combination rule for capacitors.
A is correct тАФ The line-to-line capacitance is half of the line-to-neutral capacitance due to the series arrangement of capacitances between phases.
Always remember that in capacitance calculations, capacitors in series result in smaller total capacitance, which is why the ratio is 0.5, not 2.