Join 60,000+ competitive exam aspirants
In the electrolytic refining process of metals, electrolyte is made up of which of the following?
Combination of pure metal and metal salt
Impure metal
Metal salt
Pure metal
Metal salt
In the electrolytic refining process, the electrolyte used is an aqueous solution of a salt of the metal being refined. Specifically, it consists of a mixture of a salt of the pure metal and a small amount of a mineral acid to increase conductivity.
In the electrolytic refining process, the electrolyte used is an aqueous solution of a salt of the metal being refined. Specifically, it consists of a mixture of a salt of the pure metal and a small amount of a mineral acid to increase conductivity.
Think of it as a 'purification conveyor belt' where dirty pieces enter, dissolve in a chemical bath, and then re-form as clean, shiny pieces on the other side, while dirt settles at the bottom.
Pure-Cathode (P-C): Pure metal is at the Cathode, Impure is the Anode.
M(s)тЖТMn+(aq)+neтИТ тАФ Oxidation at Anode
Mn+(aq)+neтИТтЖТM(s) тАФ Reduction at Cathode
The impure metal is made the anode and a thin strip of pure metal is made the cathode. When current is passed, the impure metal at the anode dissolves into the electrolyte as metal ions, and an equivalent amount of pure metal from the electrolyte deposits on the cathode. This process leaves impurities behind (either in the solution or as 'anode mud').
The anode is made of the impure metal block.
The cathode is made of a thin strip of pure metal.
The electrolyte is a soluble salt of the metal being purified.
The process ensures high purity (e.g., 99.99% for copper).
Obtains highly pure metals.
Allows recovery of valuable precious metal impurities like gold or silver from the anode mud.
Requires high energy consumption for large-scale operations.
The chemical electrolyte needs regular maintenance and filtration.
Refining of Copper
Refining of Zinc and Nickel
For Copper refining, the electrolyte is copper sulfate (CuSO4) solution acidified with sulfuric acid.
Option D is wrong because the electrolyte is not just a metal salt; it is usually an aqueous solution of the metal salt often acidified to prevent hydrolysis and improve conductivity.
C is correct тАФ In electrolytic refining, the electrolyte is a solution containing a salt of the metal to be refined, typically mixed with an acid to enhance electrical conductivity.
Always remember that in any electrolytic cell, oxidation (loss of electrons) happens at the Anode, and reduction (gain of electrons) happens at the Cathode.