Join 60,000+ competitive exam aspirants
A current of 2┬аA is flowing through a conductor of resistance 12┬а╬й. Then the potential difference across the conductor is:
12 V
24 V
6 V
35 V
24 V
The potential difference across a conductor is determined by Ohm's Law, which states that the voltage drop is the product of the current flowing through it and the resistance of the conductor. By substituting the given values of current (I=2┬аA) and resistance (R=12┬а╬й) into the formula V=I├ЧR, we get a potential difference of 24┬аV.
The potential difference across a conductor is determined by Ohm's Law, which states that the voltage drop is the product of the current flowing through it and the resistance of the conductor. By substituting the given values of current (I=2┬аA) and resistance (R=12┬а╬й) into the formula V=I├ЧR, we get a potential difference of 24┬аV.
Think of electrical current like water flowing through a pipe; voltage is the pressure pushing the water, and resistance is the pipe's narrowness. To maintain a constant flow of water through a fixed narrow pipe, you need to apply a proportional amount of pressure.
V=I├ЧR тАФ Ohm's Law formula to find voltage
I=RVтАЛ тАФ Ohm's Law rearranged to find current
R=IVтАЛ тАФ Ohm's Law rearranged to find resistance
Ohm's Law describes the linear relationship between voltage (V), current (I), and resistance (R) in an ohmic conductor. As charge carriers (electrons) move through the lattice structure of the conductor, they encounter resistance, resulting in a loss of electrical potential energy which manifests as a voltage drop across the ends of the conductor.
Voltage (V) is measured in Volts (V).
Current (I) is measured in Amperes (A).
Resistance (R) is measured in Ohms (╬й).
Ohm's Law is valid for ohmic conductors at constant temperature.
Simple linear relationship for analysis.
Fundamental principle for all electrical circuit design.
Does not apply to non-ohmic conductors like semiconductors or diodes.
Calculating power consumption in appliances.
Designing voltage divider circuits.
Resistance is a measure of opposition to current flow.
Option A (12 V) would be correct if the current were 1 A.
Option C (6 V) would be correct if the current were 0.5 A.
Option D (35 V) is physically inconsistent with the provided parameters.
B is correct тАФ Using Ohm's law, V=I├ЧR=2┬аA├Ч12┬а╬й=24┬аV.
Always verify units before calculation; ensure resistance is in Ohms, current in Amperes, and voltage in Volts to avoid conversion errors.