Join 60,000+ competitive exam aspirants
The power P dissipated in a resistor of resistance R when connected across a voltage source of potential difference V is given by:
P=RV2тАЛ
P=V2R
P=2V2RтАЛ
P=VR2тАЛ
P=RV2тАЛ
The relationship between electric power (P), voltage (V), and resistance (R) is derived from Ohm's Law (V=IR) and the basic power formula (P=VI). By substituting I=RVтАЛ into the power formula, we obtain P=V├Ч(RVтАЛ)=RV2тАЛ.
The relationship between electric power (P), voltage (V), and resistance (R) is derived from Ohm's Law (V=IR) and the basic power formula (P=VI). By substituting I=RVтАЛ into the power formula, we obtain P=V├Ч(RVтАЛ)=RV2тАЛ.
Think of voltage as the water pressure in a pipe and resistance as the narrowness of the pipe; a wider pipe (lower resistance) allows more water (current) to flow, and for a fixed pressure, the power capacity relates to how much work that flow can do.
P=RV2тАЛ тАФ Relationship between power, voltage, and resistance
V=IR тАФ Ohm's Law
P=VI тАФ Basic definition of electric power
In an electrical circuit, power is defined as the rate at which electrical energy is dissipated as heat in a resistor. When a potential difference V is applied across a conductor of resistance R, the current I flowing through it is determined by Ohm's Law. Substituting this current into the power equation P=VI yields the expression P=RV2тАЛ, which shows that for a constant voltage, the power dissipated is inversely proportional to the resistance.
Power is the rate of energy dissipation in a circuit.
The formula P=RV2тАЛ is most useful when voltage is held constant.
Resistance R is inversely proportional to Power P when voltage V is fixed.
Allows direct calculation of power when current is unknown.
Useful for analyzing heating elements where supply voltage is fixed.
Not applicable if the circuit components are non-ohmic.
Calculating power consumption of household appliances like heaters or bulbs.
Designing electrical circuits where voltage regulation is standard.
The SI unit of power is the Watt (W).
Option B (P=V2R) is incorrect dimensionally. Option C and D represent incorrect algebraic manipulations.
A is correct тАФ The relation is given by P=RV2тАЛ.
Always verify units if you forget a formula; Power is in Watts (J/s), so look for the expression that yields Volts2/Ohms (which simplifies to Amps├ЧVolts).