Join 60,000+ competitive exam aspirants
In a parallel combination of two different resistors, which of the following is/are correct? (A) The potential difference across each resistor has the same value. (B) The current flowing through each resistor has the same value.
Both 'A' and 'B' are incorrect.
'A' is incorrect and 'B' is correct.
'A' is correct and 'B' is incorrect.
Both 'A' and 'B' are correct.
'A' is correct and 'B' is incorrect.
In a parallel circuit, all components are connected across the same two points, ensuring that the potential difference (voltage) across each resistor is identical to the source voltage. However, the current through each resistor depends on its individual resistance according to Ohm's Law (I=RVтАЛ); thus, if the resistors have different values, the currents flowing through them will also be different.
In a parallel circuit, all components are connected across the same two points, ensuring that the potential difference (voltage) across each resistor is identical to the source voltage. However, the current through each resistor depends on its individual resistance according to Ohm's Law (I=RVтАЛ); thus, if the resistors have different values, the currents flowing through them will also be different.
Think of a water main splitting into two pipes of different thicknesses that re-join downstream; the pressure (voltage) at the start and end of both pipes is the same, but the amount of water (current) flowing through them differs because the resistance to flow depends on the pipe diameter.
VparallelтАЛ=V1тАЛ=V2тАЛ тАФ Voltage is constant in parallel circuits
ItotalтАЛ=I1тАЛ+I2тАЛ=R1тАЛVтАЛ+R2тАЛVтАЛ тАФ Total current is the sum of branch currents
In a parallel arrangement, the components provide separate paths for the flow of charge. Because all resistors terminate at the same common junctions, the electrical potential energy per unit charge, which is the voltage, remains constant across all parallel branches. By Ohm's Law, since V is constant, the current I is inversely proportional to R, meaning I1тАЛ=R1тАЛVтАЛ and I2тАЛ=R2тАЛVтАЛ. If R1тАЛюАа=R2тАЛ, then I1тАЛюАа=I2тАЛ.
Parallel connection ensures the same electrical potential across all connected resistors.
Different resistance values result in different current magnitudes flowing through each branch.
The total resistance decreases as more resistors are added in parallel (1/ReqтАЛ=1/R1тАЛ+1/R2тАЛ).
Independent operation: if one resistor fails, the others continue to work.
Total current increases as more branches are added, which may overload the source.
Household domestic electrical wiring (all appliances receive the same voltage).
Car headlights and tail lights.
| Feature | Potential Difference (V) | Current (I) (if R1 тЙа R2) |
|---|---|---|
Parameter | Same | Different |
In series combinations, current remains constant while voltage divides.
Option A is correct because parallel components share the same node connections to the source.
C is correct тАФ The potential difference across each resistor in parallel is identical, but the current flowing through them depends on their individual resistances.
Remember 'Parallel = Potentials are equal' and 'Series = Current is equal'. Always check if resistors are identical before assuming currents are equal!