Join 60,000+ competitive exam aspirants
If this is a physics question about equivalent resistance in a circuit, the question likely asks for the equivalent resistance of a given resistor network. Based on the provided options, the possible answers are:
740тАЛ╬й
720тАЛ╬й
35╬й
20╬й
720тАЛ╬й
When resistors are connected in parallel, the reciprocal of the equivalent resistance is equal to the sum of the reciprocals of the individual resistances. For resistors with values 5┬а╬й, 10┬а╬й, and 20┬а╬й, the calculation leads to an equivalent resistance of 720тАЛ┬а╬й.
When resistors are connected in parallel, the reciprocal of the equivalent resistance is equal to the sum of the reciprocals of the individual resistances. For resistors with values 5┬а╬й, 10┬а╬й, and 20┬а╬й, the calculation leads to an equivalent resistance of 720тАЛ┬а╬й.
Think of parallel resistors like multiple water pipes connected between two tanks; having more paths allows more water to flow, which decreases the total resistance (or 'opposition') to the flow of current.
ReqтАЛ1тАЛ=тИСRiтАЛ1тАЛ тАФ General formula for parallel resistors
ReqтАЛ=51тАЛ+101тАЛ+201тАЛ1тАЛ=720тАЛ┬а╬й тАФ Calculation for this specific problem
In a parallel circuit, the voltage across each resistor remains the same, while the total current is the sum of currents through each branch. The formula for equivalent resistance ReqтАЛ is ReqтАЛ1тАЛ=R1тАЛ1тАЛ+R2тАЛ1тАЛ+R3тАЛ1тАЛ. Substituting R1тАЛ=5, R2тАЛ=10, and R3тАЛ=20 gives ReqтАЛ1тАЛ=204+2+1тАЛ=207тАЛ. Thus, ReqтАЛ=720тАЛ┬а╬й.
In parallel circuits, the equivalent resistance is always smaller than the smallest individual resistor in the group.
Parallel connection ensures that if one component fails, the rest of the circuit can still operate.
Total current I=I1тАЛ+I2тАЛ+I3тАЛ applies in a parallel circuit.
Independent operation of components
Constant voltage across all components
Cannot increase total voltage by adding more resistors in parallel
Domestic wiring (all appliances receive full line voltage)
Circuit breakers and fuses
The value 720тАЛ┬а╬й is approximately 2.86┬а╬й, which is indeed less than 5┬а╬й.
Option A (740тАЛ┬а╬й) is incorrect due to calculation errors.
Option C (35┬а╬й) would be the result if they were connected in series (5+10+20).
Option D (20┬а╬й) is just one of the individual resistor values.
B is correct тАФ Using the parallel resistance formula ReqтАЛ1тАЛ=51тАЛ+101тАЛ+201тАЛ, the equivalent resistance is calculated as 720тАЛ┬а╬й.
Always verify if the equivalent resistance is smaller than the smallest individual resistor when resistors are in parallel; if not, your calculation is likely incorrect.