Join 60,000+ competitive exam aspirants
Which of the following electrolytes is used in electrolytic refining of copper?
CuO
Cu2Cl2
Na2SO4
CuSO4
CuSO4
Electrolytic refining of copper is a process used to purify crude copper obtained from smelting. The electrolyte used is an aqueous solution of acidified copper sulphate (CuSO4тАЛ with a small amount of dilute H2тАЛSO4тАЛ).
Electrolytic refining of copper is a process used to purify crude copper obtained from smelting. The electrolyte used is an aqueous solution of acidified copper sulphate (CuSO4тАЛ with a small amount of dilute H2тАЛSO4тАЛ).
Think of it as a 'purification filter' where only the copper atoms are allowed to travel from a messy, cluttered source (impure anode) to a clean, organized destination (pure cathode).
Remember 'AC' for Anode-Crude: Crude copper acts as the Anode.
Anode:Cu(s)тЖТCu2+(aq)+2eтИТ тАФ Oxidation reaction
Cathode:Cu2+(aq)+2eтИТтЖТCu(s) тАФ Reduction reaction
During electrolysis, impure copper is taken as the anode and a thin strip of pure copper as the cathode. When current passes, copper atoms from the impure anode lose electrons to form Cu2+ ions which enter the solution. These ions then migrate to the cathode, where they gain electrons to deposit as pure copper: Cu2++2eтИТтЖТCu(s).
The anode is made of impure copper.
The cathode is made of a thin sheet of pure copper.
The electrolyte is aqueous copper sulphate mixed with dilute sulphuric acid.
Impurities less reactive than copper collect at the bottom of the tank as 'anode mud'.
Produces high-purity copper (up to 99.95%).
Allows recovery of precious metals like gold and silver from anode mud.
High electricity consumption.
Requires careful management of the acidic electrolyte waste.
Production of electrical wiring components.
Manufacturing of high-grade copper alloys.
Dilute sulfuric acid is added to the electrolyte to increase its electrical conductivity and prevent the hydrolysis of copper sulphate.
CuO, Cu2тАЛCl2тАЛ, and Na2тАЛSO4тАЛ are incorrect as they do not provide the necessary ionic medium for the effective transfer of copper ions in this specific industrial process.
D is correct тАФ The electrolyte used in the electrolytic refining of copper is acidified copper sulphate (CuSO4тАЛ).
In metallurgy questions, always identify whether the process is for extraction, refining, or ore concentration. Electrolytic refining always requires an electrolyte containing the metal ions being purified.