Join 60,000+ competitive exam aspirants
How does resistance depend on the cross-sectional area A of a conductor?
Does not depend on A
Proportional to A
Proportional to A2
Inversely proportional to A
Inversely proportional to A
The electrical resistance R of a conductor is inversely proportional to its cross-sectional area A. This means as the area of the conductor increases, more space is provided for the flow of electric charges, thereby decreasing the resistance.
The electrical resistance R of a conductor is inversely proportional to its cross-sectional area A. This means as the area of the conductor increases, more space is provided for the flow of electric charges, thereby decreasing the resistance.
Think of a water pipe: a wider pipe (larger cross-sectional area) allows more water to flow through with less friction compared to a thin straw, which represents higher resistance to flow.
R=╧БAlтАЛ тАФ Ohm's law relation for resistance where ╧Б is resistivity, l is length, and A is cross-sectional area.
According to the laws of electrical resistance, R=╧БAlтАЛ, where ╧Б is the resistivity of the material, l is the length, and A is the cross-sectional area. Since resistance is inversely proportional to A, doubling the cross-sectional area results in halving the resistance, assuming all other physical properties remain constant.
Resistance is inversely proportional to the area of cross-section.
A thicker wire allows for easier passage of current, leading to lower resistance.
This principle is crucial for choosing wire gauges in electrical wiring to prevent overheating.
Thicker cables reduce power loss due to lower resistance.
Thicker conductors increase the weight, cost, and bulkiness of electrical infrastructure.
Transmission lines
Heavy-duty electrical appliance cords
The resistivity ╧Б is a material-dependent constant.
Option D is the correct physical relationship describing the inverse proportionality between resistance and area.
D is correct тАФ The electrical resistance of a conductor is inversely proportional to its cross-sectional area (RтИЭ1/A).
Always remember that resistance is a physical property that changes with geometry (l and A) and temperature, whereas resistivity is intrinsic to the material.