Join 60,000+ competitive exam aspirants
Series capacitor is used in transmission line to
Compensate the voltage drop
To reduce line loss
Limit short circuit current
Improve load power factor
Compensate the voltage drop
A series capacitor is connected in series with the transmission line to cancel a portion of the inductive reactance of the line. This reduction in net series impedance significantly decreases the voltage drop across the transmission line, thereby improving voltage regulation.
A series capacitor is connected in series with the transmission line to cancel a portion of the inductive reactance of the line. This reduction in net series impedance significantly decreases the voltage drop across the transmission line, thereby improving voltage regulation.
VdropтАЛтЙИI(Rcos╧Х+(XLтАЛтИТXCтАЛ)sin╧Х) тАФ Approximate voltage drop calculation
QCтАЛ=I2XCтАЛ тАФ Reactive power supplied by the series capacitor
The transmission line is predominantly inductive (XLтАЛ=2╧АfL). By introducing a series capacitor (XCтАЛ=2╧АfC1тАЛ), the net reactance becomes XnetтАЛ=XLтАЛтИТXCтАЛ. This reduces the total voltage drop, which is approximately ╬ФV=I(Rcos╧Х+(XLтАЛтИТXCтАЛ)sin╧Х). As XCтАЛ offsets XLтАЛ, the regulation improves.
Reduces the series inductive reactance of long transmission lines.
Improves steady-state power transfer capability (P=XV1тАЛV2тАЛтАЛsin╬┤).
Enhances transient stability by reducing the effective reactance.
Commonly expressed as a percentage of line reactance (e.g., 20-50% compensation).
Improved voltage profile at the receiving end
Increased power transfer capability
Better transient stability
Risk of sub-synchronous resonance (SSR)
Requires high-voltage protection equipment (e.g., spark gaps, MOVs)
Complexity in relay protection settings
Long-distance Extra High Voltage (EHV) transmission lines
Improving power stability in inter-connected grid systems
Option B is incorrect because while series capacitors reduce impedance, line losses (I2R) are primarily reduced by using larger conductors or higher voltages.
Option C is incorrect as series reactors (not capacitors) are used to limit fault currents.
Option D is incorrect as shunt capacitors, not series capacitors, are used for power factor improvement.
A is correct тАФ The series capacitor neutralizes a portion of the line's inductive reactance, thereby reducing the total voltage drop across the line.
Always distinguish between shunt capacitors (used for VAR compensation and P.F. improvement) and series capacitors (used for stability and voltage drop compensation).