Join 60,000+ competitive exam aspirants
Shunt capacitance in EHV line is restored to
Improve stability
Reduce fault level
Improve voltage profile
None of above
Improve voltage profile
Shunt reactors are utilized in Extra High Voltage (EHV) transmission lines to compensate for the shunt capacitive effect, which causes the Ferranti effect during light-load or no-load conditions. By installing these reactors, the voltage rise at the receiving end of the line is effectively controlled, maintaining a stable voltage profile.
Shunt reactors are utilized in Extra High Voltage (EHV) transmission lines to compensate for the shunt capacitive effect, which causes the Ferranti effect during light-load or no-load conditions. By installing these reactors, the voltage rise at the receiving end of the line is effectively controlled, maintaining a stable voltage profile.
QcтАЛ=V2╧ЙC тАФ Reactive power generated by shunt capacitance
QLтАЛ=╧ЙLV2тАЛ тАФ Reactive power consumed by shunt reactor
VrтАЛ=VsтАЛcosh(╬│l) тАФ Receiving end voltage equation for long lines
In long EHV lines, the line acts as a capacitor due to the distance between conductors and the ground. At light loads, the charging current flowing through the line inductance causes a voltage rise known as the Ferranti effect. Shunt reactors (inductors) are connected in parallel to draw a lagging current that neutralizes the leading capacitive charging current, thereby preventing excessive voltage rise.
EHV lines possess high shunt capacitance due to the large physical dimensions and high voltage levels.
The Ferranti effect is most prominent at light loads where receiving-end voltage exceeds sending-end voltage.
Shunt reactors provide inductive reactive power to cancel out the capacitive reactive power.
Voltage regulation is critical in EHV transmission to prevent equipment insulation stress.
Reduces overvoltages during light load conditions.
Prevents insulation failure due to voltage surges.
Improves overall stability and voltage regulation.
Increases the cost of the transmission system.
Consumes additional reactive power during peak load conditions unless switched.
EHV AC Transmission systems (400kV and above).
Long distance underground cable power transmission.
Shunt capacitance is proportional to the length of the line and the operating frequency.
Option B (Reduce fault level) is incorrect because fault levels are reduced by series reactors, which limit short-circuit current.
Option A (Improve stability) is partially affected by voltage, but the primary purpose of shunt reactors is specifically voltage profile control.
C is correct тАФ Shunt capacitance compensation in EHV lines is primarily employed to maintain a flat voltage profile by mitigating the Ferranti effect.
Always distinguish between shunt compensation (voltage control) and series compensation (stability and load flow control) in power system exams.