Join 60,000+ competitive exam aspirants
Shunt field of DC generators consists of ___________ number of turns and _________ conductors respectively
large and thick
large and thin
less and thick
less and thin
large and thin
The shunt field winding of a DC generator consists of a large number of turns of thin copper wire. This design ensures a high resistance, which allows only a small portion of the total armature current to flow through the field winding as required for producing the necessary excitation flux.
The shunt field winding of a DC generator consists of a large number of turns of thin copper wire. This design ensures a high resistance, which allows only a small portion of the total armature current to flow through the field winding as required for producing the necessary excitation flux.
RshтАЛ=╧БAlтАЛ тАФ Resistance calculation based on length and cross-sectional area
IshтАЛ=RshтАЛVтАЛ тАФ Ohm's law applied to the shunt field
The shunt field is connected in parallel with the armature. To limit the shunt current (IshтАЛ) such that it does not exceed 3-5% of the rated load current, the resistance (RshтАЛ=IshтАЛVтАЛ) must be high. Since R=╧БAlтАЛ, using a large number of turns increases the length (l) and using thin wire reduces the cross-sectional area (A), both of which contribute to the high resistance required for the shunt circuit.
Shunt fields are connected in parallel to the armature.
The primary goal is to maintain high resistance to minimize power loss (P=Ish2тАЛRshтАЛ).
Thin wire facilitates high turn density within the available space of the pole core.
Provides constant voltage excitation characteristics.
Efficient use of space on the field poles.
Susceptible to high field circuit resistance if connections loosen.
Limited current carrying capacity due to thin wire gauge.
Used in shunt-wound and compound-wound DC generators.
Field excitation for DC motors.
The shunt field must produce the required MMF (mathcalF=N├ЧIshтАЛ) with minimal current.
Option A is wrong because thick wires would have very low resistance, causing a short-circuit condition.
B is correct тАФ Shunt fields are designed with a large number of turns of thin wire to achieve the high resistance necessary for stable parallel operation.
Always remember that in DC machines, 'Shunt' implies parallel connection (high resistance, many thin turns) while 'Series' implies series connection (low resistance, few thick turns).