Join 60,000+ competitive exam aspirants
Skin effect exist in
Cable carrying DC current
DC transmission line
AC transmission line
DC as well as AC transmission line
AC transmission line
The skin effect is a phenomenon in electrical conductors where alternating current (AC) tends to flow near the outer surface (skin) of the conductor rather than uniformly throughout its cross-section. This results in an increase in the effective resistance of the conductor at higher frequencies, as the inner core is effectively utilized less.
The skin effect is a phenomenon in electrical conductors where alternating current (AC) tends to flow near the outer surface (skin) of the conductor rather than uniformly throughout its cross-section. This results in an increase in the effective resistance of the conductor at higher frequencies, as the inner core is effectively utilized less.
╬┤=╧Аf╬╝╧ГтАЛ1тАЛ тАФ Skin depth equation showing inverse proportionality to the square root of frequency
RacтАЛ>RdcтАЛ тАФ Relationship between AC and DC resistance due to non-uniform current distribution
The skin effect is caused by the alternating magnetic fields generated by the AC current itself. According to Faraday's law of induction, these changing magnetic fields induce eddy currents within the conductor that oppose the flow of current in the center. Consequently, current density is highest at the surface and decays exponentially towards the center of the conductor, governed by the skin depth formula.
Skin effect is negligible for DC current as frequency f=0.
It becomes more pronounced as frequency increases.
The depth of penetration decreases as the material conductivity or permeability increases.
It leads to an increase in the effective AC resistance of transmission lines.
Useful in induction heating applications where surface heating is required.
Helps in reducing interference in shielded cables.
Increases ohmic (I2R) losses in power transmission lines.
Reduces the efficiency of power delivery over long distances.
High-frequency conductor design (using Litz wire to mitigate skin effect).
Surface hardening of metals using induction heating.
For DC current, the frequency is zero, leading to an infinite skin depth, meaning current flows uniformly throughout the conductor cross-section.
Option A and B are incorrect because DC does not experience skin effect due to zero frequency.
Option C is correct because AC transmission lines operate at power frequencies (50/60 Hz) where the skin effect is present.
C is correct тАФ Skin effect is a phenomenon exclusively associated with alternating current (AC) because it relies on the time-varying magnetic fields generated by AC flow.
Always remember that for DC applications (f=0), the skin depth is infinite, implying uniform current distribution, which is a common trap in MCQ exams.