Join 60,000+ competitive exam aspirants
Skin effect in a conductor becomes more pronounced
At higher frequency
At lower frequency
At DC
None of above
At higher frequency
The skin effect is the tendency of an alternating electric current to become distributed within a conductor such that the current density is largest near the surface of the conductor and decreases with greater depths. As the frequency of the AC signal increases, this effect becomes more pronounced, resulting in an increase in the effective resistance of the conductor.
The skin effect is the tendency of an alternating electric current to become distributed within a conductor such that the current density is largest near the surface of the conductor and decreases with greater depths. As the frequency of the AC signal increases, this effect becomes more pronounced, resulting in an increase in the effective resistance of the conductor.
╬┤=╧Аf╬╝╧ГтАЛ1тАЛ тАФ where ╬┤ is the skin depth, f is frequency, ╬╝ is permeability, and ╧Г is conductivity.
RacтАЛ>RdcтАЛ тАФ indicating that effective resistance increases with frequency due to skin effect.
This phenomenon occurs due to eddy currents induced by the alternating magnetic field within the conductor. The self-inductance of the conductor is higher at the center than at the surface, creating higher inductive reactance at the core. Consequently, the current follows the path of least impedance, which is near the surface (the skin).
Skin effect is negligible at DC (f=0).
It is significant in large cross-section conductors used in transmission lines.
Higher frequency leads to a smaller skin depth, forcing current into a thinner outer layer.
The effective cross-sectional area of the conductor decreases as frequency increases.
Allows for design of hollow conductors to save material
Used in induction heating processes
Increases the effective resistance of conductors
Higher power loss (I2R loss) in transmission systems
High-frequency circuit design
Induction hardening and surface heating
Coaxial cable design
For copper at 50 Hz power frequency, the skin depth is approximately 9.3 mm.
Option B and C are incorrect because at low frequencies and DC, the current distribution is nearly uniform across the entire cross-section.
A is correct тАФ The skin effect is proportional to the square root of the frequency, causing it to become more pronounced as frequency rises.
Always remember that skin effect essentially reduces the 'useful' area of the conductor, which is why stranded conductors are used to mitigate this effect in AC power transmission.