Join 60,000+ competitive exam aspirants
Steam is super-heated in order to
Improve rankine cycle efficiency
Reduce initial condensation losses
Avoid too high temperature in the last stage of the turbine
All of above
All of above
Superheating steam involves adding heat to saturated steam at constant pressure to raise its temperature, which significantly increases the thermal efficiency of the Rankine cycle and prevents moisture formation in turbine blades. By shifting the expansion process toward the superheated region, the steam quality at the turbine exhaust is maintained above acceptable limits, protecting mechanical components from erosion.
Superheating steam involves adding heat to saturated steam at constant pressure to raise its temperature, which significantly increases the thermal efficiency of the Rankine cycle and prevents moisture formation in turbine blades. By shifting the expansion process toward the superheated region, the steam quality at the turbine exhaust is maintained above acceptable limits, protecting mechanical components from erosion.
╬╖cycleтАЛ=1тИТTaveragesтАЛourceтАЛTcondenserтАЛтАЛ тАФ Effect of superheating on efficiency
x=sfgтАЛs2тАЛтИТsfтАЛтАЛ тАФ Steam quality relation
The principle relies on the TтИТs diagram where superheating extends the expansion curve to the right. This ensures that the dryness fraction (x) at the turbine exit remains high, as excessive moisture leads to impingement erosion and aerodynamic losses. Furthermore, higher mean temperature of heat addition increases the efficiency based on the Carnot principle ╬╖=1тИТTsourceтАЛTrejectтАЛтАЛ.
Superheating increases the total heat input per unit mass of steam.
It shifts the turbine expansion line to the right on a TтИТs diagram, keeping the exit state in the superheated or high-quality vapor region.
Higher steam temperatures allow for improved thermodynamic cycle efficiency.
Excessive superheat is limited by the metallurgical constraints of the turbine materials.
Increases overall plant thermal efficiency
Reduces liquid droplet formation in turbine stages
Prevents erosion of turbine blades by water droplets
Improves turbine internal efficiency
Requires high-grade heat-resistant alloys
Increased cost of superheater boiler sections
Risk of thermal stress during start-up
Thermal Power Plants
Combined Cycle Power Plants
Industrial Cogeneration
Standard practice in thermal plants is to limit steam temperature to roughly 540┬░C to 600┬░C due to material strength limits.
Option B is crucial because even 5-10% moisture can cause severe blade erosion due to high-velocity liquid droplet impacts.
D is correct тАФ Superheating steam improves thermodynamic efficiency, protects turbine blades by reducing moisture content, and allows for controlled operating temperatures.
Always remember that in the Rankine cycle, increasing the mean temperature of heat addition is the most effective way to increase thermal efficiency.