Join 60,000+ competitive exam aspirants
String efficiency of a HV line is around
100%
80%
40%
10%
80%
String efficiency of an insulator string represents the uniformity of potential distribution across individual discs in the string. Ideally, it should be 100%, but due to the presence of shunt capacitance between the metal links and the transmission tower (ground), the potential distribution is non-uniform, resulting in an efficiency typically around 80%.
String efficiency of an insulator string represents the uniformity of potential distribution across individual discs in the string. Ideally, it should be 100%, but due to the presence of shunt capacitance between the metal links and the transmission tower (ground), the potential distribution is non-uniform, resulting in an efficiency typically around 80%.
η=n×Vdisc,maxVstring×100% — Efficiency calculation
Ishunt=V×jωCshunt — Shunt current affecting potential distribution
In a string of suspension insulators, each disc acts as a capacitor. Due to the proximity of the tower, stray capacitance exists between each metal link and the grounded tower. This stray current causes the voltage across the insulator disc nearest to the conductor to be significantly higher than the disc nearest to the cross-arm, leading to an unequal potential gradient and reduced efficiency.
String efficiency decreases as the number of discs in the string increases.
The disc nearest to the conductor experiences the maximum electrical stress.
Methods to improve efficiency include using longer cross-arms, grading the insulators, or using a static shield (grading ring).
A 100% efficiency implies all discs experience equal voltage stress, which is practically impossible in HV lines.
Reduces the risk of insulator flashover due to unequal stress
Increases the lifespan of insulator discs by preventing localized breakdown
Increases the cost and complexity of the tower design
Additional components like grading rings increase the maintenance requirement
Extra High Voltage (EHV) transmission lines
High Voltage Direct Current (HVDC) systems
For short strings (e.g., 3-4 discs), efficiency is higher (around 90%); for longer strings, it significantly drops.
Option 100% is theoretically ideal but practically unattainable; 40% and 10% indicate extremely poor design.
B is correct — The string efficiency of a high voltage suspension insulator string is typically around 80% due to unequal voltage distribution caused by shunt capacitance.
Always remember that the insulator disc nearest to the line conductor is the most stressed; therefore, it is the most prone to puncture or flashover.