Join 60,000+ competitive exam aspirants
If the frequency of a transmission system is changed from 50 Hz to 100 Hz, the string efficiency
Increases
Decreases
Remains unchanged
May increase or decrease depending on line parameters
Remains unchanged
String efficiency in an insulator string depends on the ratio of mutual capacitance to shunt capacitance. Since both mutual and shunt capacitances are physical properties of the insulator geometry and material, changing the operating frequency does not alter these values, thereby keeping the string efficiency unchanged.
String efficiency in an insulator string depends on the ratio of mutual capacitance to shunt capacitance. Since both mutual and shunt capacitances are physical properties of the insulator geometry and material, changing the operating frequency does not alter these values, thereby keeping the string efficiency unchanged.
η=n⋅Vunit1Vtotal — String Efficiency definition
XCm=2πfCm1 — Mutual capacitive reactance
XCs=2πfCs1 — Shunt capacitive reactance
In an insulator string, the voltage distribution across individual disks is non-uniform due to shunt capacitance between the disks and the tower (ground). The voltage across any unit is determined by the capacitive potential divider network. Because the capacitive reactance is XC=2πfC1, a change in frequency f scales both the mutual and shunt reactances by the same factor. Consequently, the ratios of the impedances remain constant, maintaining the same voltage distribution.
String efficiency is purely a function of the capacitance ratio m=CmCs.
Frequency f cancels out in the voltage distribution equation for capacitive chains.
Higher string efficiency implies better voltage distribution across discs.
Typical improvements for efficiency include using grading rings or longer cross-arms.
Uniform voltage stress prevents local insulation breakdown.
Minimizes corona effect on discs near the conductor.
Requires additional hardware like grading rings for very high voltages.
Insulator string length increases with higher voltage ratings.
High Voltage AC (HVAC) transmission lines.
Substation insulator bus supports.
The string efficiency is defined as: Efficiency=n×Voltage across disc nearest to line conductorVoltage across whole string×100%.
Options B and D are incorrect because frequency variations do not affect the capacitive reactance ratios in a purely capacitive network.
C is correct — String efficiency is independent of the operating frequency because it is determined solely by the ratio of shunt to mutual capacitances.
Remember that in purely capacitive circuits, the voltage distribution is independent of frequency, unlike inductive circuits where reactance is directly proportional to frequency.