Join 60,000+ competitive exam aspirants
Sulphur content of liquid fuels assumes importance from the point of view of
Firing rate
Heating rate
Corrosion
Efficiency
Corrosion
The sulphur content in liquid fuels like furnace oil or diesel is a critical quality parameter primarily due to its corrosive nature. During combustion, sulphur oxidizes to form sulphur dioxide (SO2тАЛ) and sulphur trioxide (SO3тАЛ), which react with water vapor to produce sulphuric acid (H2тАЛSO4тАЛ), leading to severe cold-end corrosion in boilers and engines.
The sulphur content in liquid fuels like furnace oil or diesel is a critical quality parameter primarily due to its corrosive nature. During combustion, sulphur oxidizes to form sulphur dioxide (SO2тАЛ) and sulphur trioxide (SO3тАЛ), which react with water vapor to produce sulphuric acid (H2тАЛSO4тАЛ), leading to severe cold-end corrosion in boilers and engines.
S+O2тАЛтЖТSO2тАЛ тАФ Primary oxidation
SO3тАЛ+H2тАЛOтЖТH2тАЛSO4тАЛ тАФ Acid formation
When fuel containing sulphur is burnt, the chemical reactions are: S+O2тАЛтЖТSO2тАЛ and 2SO2тАЛ+O2тАЛтЖТ2SO3тАЛ. As flue gases cool below the acid dew point, SO3тАЛ combines with water vapor: SO3тАЛ+H2тАЛOтЖТH2тАЛSO4тАЛ. This sulphuric acid condenses on metal surfaces such as economizers, air preheaters, and exhaust systems, causing rapid pitting and structural degradation.
High sulphur content accelerates the degradation of boiler heat transfer surfaces.
Acid dew point corrosion occurs typically in economizers and air preheaters.
Environmental regulations strictly limit sulphur content to reduce acid rain and smog.
High sulphur fuels require higher exhaust temperatures to prevent condensation.
Lower sulphur fuels extend equipment maintenance intervals.
Reduced SOx emissions improve local air quality.
High cost of hydro-desulphurization (HDS) processes in refineries.
Higher fuel costs for industrial consumers.
Power generation boilers
Marine diesel engines
Industrial furnaces
Option A (Firing rate) depends on the heating value and fuel supply pressure.
Option B (Heating rate) is determined by the calorific value of the fuel.
Option D (Efficiency) is affected by fuel quality, but sulphur specifically targets material integrity.
C is correct тАФ Sulphur content is critical because it leads to the formation of acidic compounds that cause severe corrosion in boiler equipment.
In power systems, always associate sulphur with the 'Acid Dew Point' problem; this helps in both Combustion and Materials science sections of engineering exams.