Join 60,000+ competitive exam aspirants
The area under the load curve divided by 24 hours gives
Average load
Pick load
Least load
None of above
Average load
The average load is defined as the ratio of the total energy consumed (area under the load curve) during a specific period (usually 24 hours) to the total number of hours in that period. It represents the constant load that, if maintained throughout the day, would result in the same total energy consumption as the actual fluctuating load.
The average load is defined as the ratio of the total energy consumed (area under the load curve) during a specific period (usually 24 hours) to the total number of hours in that period. It represents the constant load that, if maintained throughout the day, would result in the same total energy consumption as the actual fluctuating load.
Average┬аLoad=24┬аhoursArea┬аunder┬аload┬аcurve┬аin┬аkWhтАЛ
Load┬аFactor=MaximumDemandAverageLoadтАЛ
The load curve plots the power demand against time. Integrating the function of the load curve P(t) from t=0 to t=24 gives the total energy output in kWh or MWh. Dividing this integral by 24 provides the equivalent mean value of the power delivered over the complete diurnal cycle.
The area under the load curve directly represents the total energy consumed (in kWh).
Average load is always less than or equal to the maximum demand.
A higher average load (closer to maximum demand) implies a higher load factor, indicating better utilization of generation equipment.
The load curve is essential for determining the capacity of power plants and scheduling of generation units.
Helps in estimation of total energy consumption.
Useful for calculating the load factor of a system.
Provides a baseline for evaluating power system efficiency.
Does not reveal the instantaneous peak demand experienced during the day.
Provides no information regarding the duration of the maximum demand peak.
Utility billing and revenue generation analysis.
Power system planning and infrastructure sizing.
Scheduling of base load and peak load power stations.
The area under the load curve is essentially the integral of power over time, yielding energy in MWh.
Option B (Peak load) is the highest point on the curve, not the average.
Option C (Least load) refers to the base load or minimum demand during the period.
A is correct тАФ The average load is mathematically defined as the total area under the daily load curve divided by the total time duration (24 hours).
Always remember that the 'Area under the Load Curve' represents Energy (kWh), whereas the 'Peak' of the curve represents the Maximum Demand (kW).