Join 60,000+ competitive exam aspirants
The auxiliary consumption in a thermal power (steam) station is
тАУ 5 %
тАУ 10 %
15 тАУ 20 %
20 тАУ 25 %
тАУ 5 %
Auxiliary consumption refers to the portion of the total power generated by a power plant that is utilized internally to run station equipment. In a thermal power station, this value typically ranges from 3% to 5% of the total generated power, depending on the plant's design and capacity.
Auxiliary consumption refers to the portion of the total power generated by a power plant that is utilized internally to run station equipment. In a thermal power station, this value typically ranges from 3% to 5% of the total generated power, depending on the plant's design and capacity.
PnetтАЛ=PgrossтАЛтИТPauxтАЛ тАФ where PnetтАЛ is the net output power, PgrossтАЛ is the total generated power, and PauxтАЛ is the auxiliary power consumption.
╬╖stationтАЛ=PgrossтАЛPnetтАЛтАЛ├Ч100 тАФ the efficiency metric considering auxiliary usage.
Thermal power plants require energy to power essential mechanical systems such as Feedwater pumps, Forced Draft (FD) and Induced Draft (ID) fans, Coal handling plants, and Circulating water pumps. These loads are necessary to maintain the thermal cycle and cooling requirements of the boiler and turbine. The power consumed by these auxiliaries reduces the net power available for export to the grid (Net Generation = Gross Generation - Auxiliary Consumption).
Auxiliary consumption is a direct deduction from the gross output.
Higher auxiliary consumption leads to lower overall plant thermal efficiency.
Modern plants with advanced automation may achieve even lower consumption levels below 5%.
Auxiliary loads are continuous and essential for the safe operation of boiler and turbine systems.
Ensures safe startup and shutdown procedures.
Maintains continuous cooling for steam condensers.
Facilitates precise fuel and air ratio control for optimal combustion.
Reduces the net energy export capacity of the power plant.
Increases the operational cost per unit of electricity sold.
Base load thermal power stations.
Captive power plants in industrial complexes.
The range 3-5% is the standard industrial benchmark for coal-fired thermal power plants.
Option B (10%) and higher values are typically considered excessively high for a well-maintained, modern conventional thermal power station.
A is correct тАФ The auxiliary consumption in a typical thermal power station is generally between 3% and 5% of the gross energy generated.
Always remember that Net Efficiency is always lower than Gross Efficiency due to auxiliary power requirements in steam power cycles.