Join 60,000+ competitive exam aspirants
Most of the steam turbo-alternators are wound for
2 poles
10 to 20 poles
20 to 30 poles
6 poles
2 poles
Steam turbo-alternators are high-speed machines typically operating at 3000 RPM (for 50 Hz grid frequency). To achieve this high rotational speed using the relationship between frequency, poles, and speed, the number of poles must be kept to the minimum value of 2.
Steam turbo-alternators are high-speed machines typically operating at 3000 RPM (for 50 Hz grid frequency). To achieve this high rotational speed using the relationship between frequency, poles, and speed, the number of poles must be kept to the minimum value of 2.
NsтАЛ=P120fтАЛ тАФ Synchronous speed formula where NsтАЛ is in RPM, f in Hz, and P is number of poles.
The fundamental equation relating synchronous speed (NsтАЛ), frequency (f), and number of poles (P) is NsтАЛ=P120fтАЛ. Since steam turbines are designed to run at very high speeds to maximize thermodynamic efficiency, minimizing the denominator P (the number of poles) is essential to achieve the required NsтАЛ (e.g., 3000 RPM for 50 Hz or 3600 RPM for 60 Hz).
Steam turbines are high-speed prime movers compared to hydro turbines.
A 2-pole alternator running at 50 Hz yields NsтАЛ=2120├Ч50тАЛ=3000 RPM.
High speed reduces the physical size and cost of the alternator for a given power rating.
Higher efficiency due to high-speed operation
Smaller physical size (diameter) reduces centrifugal stress and material usage
Requires high-quality rotor materials to withstand high centrifugal forces
Requires complex lubrication and cooling systems due to high rotor surface speeds
Thermal power plants
Nuclear power plants
Hydro-generators typically use salient pole rotors with many poles (e.g., 20-100) because water turbines rotate at much lower speeds.
Option B, C, and D are incorrect because a higher number of poles would result in a lower synchronous speed, making the turbine inefficient for steam applications.
A is correct тАФ Steam turbo-alternators are designed with 2 poles to achieve the high rotational speeds (3000/3600 RPM) required by steam turbines.
Always remember that for a fixed frequency, speed and poles are inversely proportional; thus, 'High-Speed' machines (Steam) use minimum poles, and 'Low-Speed' machines (Hydro) use maximum poles.