Join 60,000+ competitive exam aspirants
Most of the generators in thermal power plants run at
15000 rpm
3000 rpm
1500 rpm
1000 rpm
3000 rpm
Most thermal power plant generators are 2-pole synchronous machines designed to run at 3000 rpm to produce electricity at a standard industrial frequency of 50 Hz. The speed is directly determined by the relationship between the supply frequency and the number of poles of the generator.
Most thermal power plant generators are 2-pole synchronous machines designed to run at 3000 rpm to produce electricity at a standard industrial frequency of 50 Hz. The speed is directly determined by the relationship between the supply frequency and the number of poles of the generator.
NsтАЛ=P120fтАЛ тАФ Synchronous speed formula where NsтАЛ is speed in rpm, f is frequency in Hz, and P is number of poles.
The rotational speed of a synchronous generator is determined by the formula NsтАЛ=P120fтАЛ. In a thermal plant, the frequency (f) is fixed at 50 Hz. To maintain grid stability with a typical 2-pole turbine generator (P=2), the machine must rotate at 3000 rpm. Increasing the number of poles would decrease the rotational speed, which is generally not preferred for steam turbines due to mechanical design constraints.
Thermal power plants use high-speed steam turbines that are most efficient at 3000 rpm.
The 3000 rpm speed corresponds to a 2-pole machine (p=1 pair) at 50 Hz.
Hydroelectric generators often run at lower speeds due to their high number of poles.
Frequency stability is critical for the synchronization of the generator with the power grid.
High efficiency for steam turbines
Compact generator design due to high speed
Requires complex high-speed lubrication and cooling systems
High mechanical stress on turbine blades
Base load thermal power stations
Nuclear power plants
In countries with a 60 Hz grid frequency, these generators operate at 3600 rpm for a 2-pole configuration.
Option C (1500 rpm) corresponds to a 4-pole machine, often used in larger thermal units or hydro-generators.
Option D (1000 rpm) corresponds to a 6-pole machine.
B is correct тАФ Standard 2-pole synchronous generators in thermal power plants operate at 3000 rpm to maintain a 50 Hz output frequency.
Always remember the relation NsтАЛ=P120fтАЛ. If you see 'thermal', assume high speed (2-pole); if you see 'hydro', assume low speed (many poles).